Ease of use and comfort
Behind the front seats
Behind the rear bench seat
To change the height:
3
► Lift and pull the floor towards you using its
central handle, then use the lateral stops to
move it.
► Push the floor all the way forwards to place it
in the desired position.
► Fold down the rear bench seat
► Insert the ends of the bar, one after the other,
into the fixing points in the roof.
► Remove the load space cover roller.
► Insert the ends of the bar, one after the other,
into the fixing points in the roof.
To keep it in the inclined position:
► From the high position, lift the floor towards
the load space cover.
► Engage it in the inclined position in the lateral
stops to secure it in this position.
► Attach the net’s straps to the lower anchoring
points, located on the fixings of the rear bench
seat backrest.
► Attach the straps of the net to the lower rings,
located on each side trim of the boot.
► Pull on the straps to stretch the net.
► Pull on the straps to stretch the net.
2-position boot floor (SW)
12 V accessory socket
► To connect a 12 V accessory (maximum
power: 120 W), lift the cover and plug in a
suitable adaptor.
(Depending on version)
This 2-position floor allows the boot volume to
be optimised using the lateral stops located on
the sides:
– High position (100 kg max.): to obtain a flat
floor up to the front seats, when the rear seats
are folded down.
► Switch on the ignition.
The connection of an electrical device
not approved by PEUGEOT, such as a
USB charger, may adversely affect the
operation of vehicle electrical systems,
causing faults such as poor radio reception or
interference with displays in the screens.
– Low position (150 kg max.): maximum boot
volume.
On certain versions, the adjustable boot
floor cannot be fitted in the low position.
65
English 