Get Ease of use and comfort -> Front seats Guide for Peugeot 308 4 Door 2021-2025

Ease of use and comfort

Reﬁtting a head restraint

When driving

Front head restraints

► Insert the head restraint rods into the guides

in the corresponding seat backrest.

► Push the head restraint fully down.

► Press the lug A to release the head restraint

and push it down.

Maintain a good driving position and hold the

steering wheel with both hands at the 'quarter to

three' position, so that you can easily and quickly

reach the controls behind and near the steering

wheel.

Adjusting the height

► Adjust the height of the head restraint.

Never adjust the seats or steering wheel

when driving.

Always keep your feet on the ﬂoor.

Never drive with the head restraints

removed; they should be in place and

adjusted for the occupant of the seat.

Upwards:

Front seats

Manual adjustments

► Pull the head restraint up to the desired

position; you can feel the head restraint clicking

into position.

Before moving the seat backwards,

ensure that there is no person or object

that might prevent the full travel of the seat.

There is a risk of trapping or pinching

passengers if present in the rear seats or of

jamming the seat if large objects are placed

on the ﬂoor behind the seat.

Longitudinal

Downwards:

► Depending on equipment, press lug A or

button B and then, while still pressing, lower the

head restraint.

The head restraint is correctly adjusted

when its upper edge is level with the top

of the head.

► Raise the control bar and slide the seat

forwards or backwards.

► Release the control bar to lock the seat in

position on one of the notches.

Removing a head restraint

► Pull the head restraint fully up.

► Press lug A to release the head restraint and

raise it fully.

► Stow the head restraint securely.

Ease of use and comfort

Height

► Turn the knob to obtain the desired level of

lumbar support.

Cushion height and angle

Seat cushion length

► Pull the control upwards to raise or push it

downwards to lower, until you obtain the position

required.

► Tilt the rear of the control upwards or

downwards to obtain the required height.

► Tilt the front of the control upwards or

downwards to obtain the required angle.

► Pull the handle forwards to release the

cushion, then move the front part of the cushion

forwards or backwards.

Backrest angle

Electric adjustments

Longitudinal

► Turn the knob to obtain the desired angle.

Lumbar

► Tilt the control forwards or rearwards.

► Push the control forwards or backwards to

slide the seat.

Ease of use and comfort

Lumbar

► Press button 1 or 2 to recall the

corresponding position.

An audible signal sounds when adjustment is

complete.

You can interrupt the current movement by

pressing button M, 1 or 2 or by using one of the

seat adjustment controls.

A stored position cannot be recalled while

driving.

Memorising driving

positions

Associated with the electrically-adjusted driver’s

seat, this function allows two driving positions

to be memorised, to make these adjustments

easier if there are frequent driver changes.

It records the electric adjustments made to the

seat and door mirrors.

The control allows independent adjustment of

the depth and vertical position of the lumbar

support.

The recalling of stored positions is deactivated

45 seconds after switching oﬀ the ignition.

► Press and hold the front or rear of the

control to increase or reduce the lumbar

support.

► Press and hold the top or bottom of the

control to raise or lower the lumbar support area.

Heated seats

Without i-Toggles

On/Oﬀ

Using buttons 1/2/M

► Enter the vehicle and switch the ignition on.

► Adjust your seat and the door mirrors.

► Press button M, then press button 1 or 2

within 4 seconds.

Seat cushion angle

This electric adjustment control is present on

‘AGR’ certiﬁed manually-adjustable seats.

An audible signal conﬁrms the memorisation.

Memorising a new position cancels the previous

position.

Recalling a stored position

► Press the button corresponding to the seat.

► Each press changes the heating level; the

corresponding number of indicator lamps come

on.

► To switch oﬀ the heating, press the button

until all of the indicator lamps are oﬀ.

While the seat is moving, take care that

no person or object hinders the

automatic movement of the seat.

► Press and hold the front or rear of the button

to raise or lower the front of the seat cushion.

With the ignition on or engine running

Ease of use and comfort

The system status is memorised when the

ignition is switched oﬀ.

consumption in turn decreases energy

consumption.

If the settings are suitable, press to

activate/deactivate the function in the

Seat Options application.

If no action is taken, the display returns to its

initial state.

With i-Toggles

Prolonged use of heated seats is not

recommended for people with sensitive

skin.

There is a risk of burns for people whose

perception of heat is impaired (e.g. illness,

taking medication).

To keep the heated pad intact and to prevent

a short circuit:

– Do not place heavy or sharp objects on the

seat.

Activation/Deactivation

The function status is not memorised when the

ignition is switched oﬀ.

In the Seat Options touch screen

application, select the Seat Options tab.

► Select the driver or passenger seat.

The corresponding page is displayed with the

last memorised settings.

If the settings are suitable, press to

activate/deactivate the function in the

Seat Options application.

Changing settings

► In the Massage page, select the seat

concerned.

► Select a massage intensity from the three

preset levels: "1" (Low), "2" (Normal) or "3"

(High).

– Do not kneel or stand on the seat.

– Do not spill liquids onto the seat.

– Never use the heating function if the seat

is damp.

If no action is taken, the display returns to its

initial state.

The function status is not memorised when the

ignition is switched oﬀ.

► Select another type of massage from those

oﬀered.

The modiﬁcations are taken into account

immediately and memorised when the ignition is

switched oﬀ.

Changing settings

Once activated, the system starts a one hour

massage cycle, made up of sequences of 6

minutes of massage followed by 3 minutes at

rest.

The system stops automatically at the end of the

cycle.

Multipoint massage

► In the Seat Options page, select the seat

concerned.

► Select an intensity from the three preset

levels: "1" (Low), "2" (Normal) or "3" (High).

The settings are memorised when the ignition is

switched oﬀ.

System with a choice of type of massage and

adjustment of its intensity.

This system operates with the engine running, as

well as in STOP mode of the Stop & Start.

Activation/Deactivation

In the Seat Options touch screen

application, select the Massage tab.

► Select the driver or passenger seat.

The corresponding page is displayed with the

last memorised settings.

Do not use the function when the seat

is not occupied.

Reduce the heating intensity as soon as

possible.

When the seat and passenger compartment

have reached a satisfactory temperature,

switch the function oﬀ; reducing electrical

Download User Manual App

Ease of use and comfort -> Front seats for Your Peugeot 308 4 Door 2021-2025

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals