Download User Manual App

Quickly access user manual for free!

Ease of use and comfort -> Temperature pre-conditioning (Rechargeable hybrid) for Your Peugeot 308 4 Door 2021-2025

Ease of use and comfort  
mist, frost, snow), located on either side of the  
windscreen.  
It can be used both before setting off and while  
driving.  
This function is available when the vehicle is  
connected or not connected.  
The programming can also be carried out  
from a smartphone via the MYPEUGEOT  
APP application.  
For more information on the Remotely-  
operable functions, refer to the corresponding  
section.  
3
Programming  
In the Climate touch screen application,  
select the Preconditioning tab.  
Switching on/off  
► Press + to add a programme.  
► Select the time of entry into the vehicle and  
the desired days. Press OK.  
The fan noise that occurs during  
temperature pre-conditioning is perfectly  
normal.  
► Press ON to activate this programming.  
The pre-conditioning sequence begins  
approximately 45 minutes before the  
programmed time when the vehicle is connected  
(20 minutes when it is not connected) and is  
maintained for 10 minutes after.  
Operating conditions  
– The function is only activated when the  
ignition is switched off and the vehicle  
locked.  
– When the vehicle is not connected, the  
function is only activated if the battery charge  
level is greater than 20%.  
– When the vehicle is not connected and a  
recurring programme is active (e.g. from Monday  
to Friday), if two temperature pre-conditioning  
sequences are run without the vehicle being  
used, the programme will be deactivated.  
► With the engine running, press this button to  
activate/deactivate the function (confirmed by an  
indicator lamp).  
The period of operation depends on the outside  
temperature.  
The function switches off automatically to  
prevent excessive power consumption.  
This indicator lamp comes on fixed when  
a temperature pre-conditioning cycle is  
programmed. It flashes when temperature pre-  
conditioning is in progress.  
Temperature  
pre-conditioning  
(Rechargeable hybrid)  
This function allows you to programme the  
temperature in the passenger compartment to  
reach a pre-defined, non-modifiable temperature  
(approx. 21°C) before you enter the vehicle, on  
the days and at the times of your choice.  
You can set multiple programmes.  
Each one is saved in the system.  
To optimise the driving range, we recommend  
starting a programme while the vehicle is  
connected.  
57