Get Ease of use and comfort -> Mirrors Guide for Peugeot 308 4 Door 2021-2025

Ease of use and comfort

It can be activated when the outside temperature

is below 20°C.

Without i-Toggles

Steering wheel

adjustment

Mirrors

Door mirrors

Demisting/Defrosting

The demisting/defrosting of the door

mirrors works with the demisting/

defrosting of the rear screen.

For more information on Rear screen

demisting/defrosting, refer to the

corresponding section.

► When stationary, pull the control to release

the steering wheel.

► Adjust the height and reach to suit your

driving position.

► With the engine running, press this button to

activate/deactivate the function (conﬁrmed by the

indicator lamp coming on/going out).

The system is automatically deactivated every

time the engine is switched oﬀ.

As a safety measure, the mirrors should

be adjusted to reduce the "blind spots".

The objects that you see in the mirrors are

in fact closer than they appear. Take this

into account in order to correctly judge the

distance of vehicles approaching from behind.

► Push the control to lock the steering wheel.

For safety reasons, these adjustments

must only be carried out with the vehicle

stationary.

With i-Toggles

In the Climate touch screen application,

select the Seats and Steering Wheel

tab.

PEUGEOT i-Cockpit®

Press to activate/deactivate the function.

The instrument panel information is

visible above the steering wheel, for greater

safety and driving comfort.

The function is memorised each time the engine

is switched oﬀ.

Adjust the steering wheel height so that it

does not obstruct the instrument panel.

Heated steering wheel

In cold weather, this function heats the circular

part of the steering wheel.

Ease of use and comfort

– Once the vehicle speed exceeds 6 mph

Adjustment

► From the inside, with the

ignition on, place control A in the

central position.

(10 km/h).

– When the engine is switched oﬀ.

It can be activated/deactivated in the

Settings > Vehicle touch screen

application.

► Pull control A backwards.

► Lock the vehicle from the outside.

If the mirrors are folded using control A,

they will not unfold when the vehicle is

unlocked.

Interior rear view mirror

Equipped with an anti-dazzle system, which

darkens the mirror glass and reduces the

nuisance to the driver caused by the sun,

headlamps of other vehicles, etc.

Electric unfolding

► From outside: unlock the vehicle.

► From inside: with the ignition on, place

control A in the central position and then pull it

rearwards.

Manual model

Day/night position

► Move control A to the right or to the left to

select the corresponding mirror.

► Move control B in any of the four directions

to adjust.

The automatic folding/unfolding of the

door mirrors is conﬁgured in the

Settings > Vehicle touch screen application.

Before using an automatic car wash, fold the

mirrors.

► Return control A to its central position.

Manual folding

The mirrors can be folded manually (parking

obstruction, narrow garage, etc.).

► Pull the lever to change to the anti-dazzle

"night" position.

► Push the lever to change to the normal "day"

position.

Adjustment

► Adjust the mirror to the normal "day" position.

Automatic tilting in reverse gear

Depending on version, this function allows you to

automatically tilt the mirrors downwards to assist

with parking manoeuvres in reverse gear.

With the engine running, on engaging reverse

gear, the mirror glasses tilt downwards.

They each return to their original positions:

– A few seconds after coming out of reverse

gear.

► Turn the mirror towards the vehicle.

Electric folding

Depending on equipment, the door mirrors can

be folded electrically.

Ease of use and comfort

Automatic "electrochrome" model

vehicle is being driven in Electric mode

(depending on country of sale).

Reﬁtting a head restraint

► Insert the head restraint rods into the guides

in the corresponding backrest.

► Push the head restraint fully down.

► Press the lug A to release the head restraint

and push it down.

Rear bench seat

Rear head restraints

Never drive with passengers seated at

the rear when the head restraints are

removed; the head restraints should be in

place and in the high position.

The head restraint for the centre seat

and those for the outer seats are not

interchangeable.

The electrochrome system uses a sensor that

detects the level of exterior brightness and that

coming from the rear of the vehicle, in order to

automatically and gradually switch between day

and night usage.

Folding the backrests

They have two positions:

– A high position, for when the seat is in use:

► Pull the head restraint fully up.

– A low position, for stowing, when the seat is

not in use:

► Press the lug A to release the head

restraint and push it down.

To ensure optimum visibility while

manoeuvring, the mirror automatically

brightens when reverse gear is engaged.

The system is deactivated if the load in the

boot exceeds the height of the load space

cover or if the load space cover has items

placed on it.

The rear head restraints can be removed.

Removing a head restraint

Each section of the backrest has one or two

release controls:

– A grip 1 on the outer edge of the backrest.

– A lever 2 on the boot side trim (SW).

► Release the backrest using control 1.

► Tilt the backrest slightly forwards.

► Pull the head restraint fully up.

► Press the lug A to release the head restraint

and remove it completely.

Rechargeable hybrid vehicles

An LED, located below the interior rear

view mirror and visible from outside the

vehicle, lights up blue to indicate that the

Download User Manual App

Ease of use and comfort -> Mirrors for Your Peugeot 308 4 Door 2021-2025

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals