Dashboard instruments -> 10-inch touch screen for Your Peugeot 408 4 Door Second Generation (2022-2026)

Dashboard instruments  
Actual traction battery charge level and  
Average speed  
Display of visual manoeuvring aid functions.  
Interactive handbook.  
remaining range (Electric)  
(mph or km/h)  
Calculated since the last trip comput-  
er reset.  
Video tutorials (e.g. screen management,  
driving aids, voice recognition).  
This value may vary following a change in  
driving style or terrain, leading to a significant  
change in current fuel consumption.  
Audio equipment and telephone controls with  
display of associated information.  
Distance travelled  
For Petrol or Diesel versions  
(miles or km)  
Connected services and display of  
associated information.  
When the range falls below 19 miles (30 km),  
dashes are displayed.  
After filling with at least 5 litres of fuel, the range  
is recalculated and is displayed if it exceeds 62  
miles (100 km).  
Dashes appearing permanently in place of  
numbers while driving indicates a malfunction.  
Contact a dealer or a qualified workshop.  
Calculated since the last trip comput-  
er reset.  
Navigation system controls and display  
of associated information (depending on  
equipment).  
Stop & Start time counter  
Voice recognition (depending on equipment).  
(minutes/seconds or hours/minutes)  
For safety reasons, always stop the  
vehicle before performing operations  
that require sustained attention.  
Some functions are not accessible while  
driving.  
For electric versions  
Two successive alert levels indicate that the  
energy available has dropped to a low level.  
For more information on the Indicators, and in  
particular the Charge level indicator, refer to  
the corresponding section.  
If your vehicle is fitted with the Stop & Start  
function, a time counter calculates the time spent  
in STOP mode during a journey.  
The time counter is reset each time the ignition  
is switched on.  
Current consumption  
Recommendations  
(mpg or l/100 km or km/l) (miles/kWh or  
kWh/100 km or km/kWh) (Electric)  
Calculated during the last few  
seconds.  
These recommendations are valid for the touch  
screen and for the i-Toggles (depending on  
equipment).  
The touch screen and the i-Toggles screen are  
capacitive touch screens.  
10-inch touch screen  
This system gives access to the following  
elements:  
This function is only displayed at speeds above  
19 mph (30 km/h).  
Do not use pointed objects on the touch screen.  
Do not touch the touch screen with wet hands.  
Time and exterior temperature.  
Heating/air conditioning system controls and  
reminders of settings.  
Average consumption  
Use a soft, clean cloth to clean the touch  
screen.  
(mpg or l/100 km or km/l) (miles/kWh or  
kWh/100 km or km/kWh) (Electric)  
Calculated since the last trip  
computer reset.  
Settings for driving aid functions, comfort and  
safety functions, audio equipment and digital  
instrument panel.  
Main controls  
Access to one of the home pages  
Return to the first home page  
Settings of functions specific to rechargeable  
hybrid vehicles.  
24  
Dashboard instruments  
Direct access to the Climate  
Adding/Removing shortcuts  
Seats  
application  
Activation/Deactivation and  
configuration of the seat comfort  
functions (heating and massages).  
3
Direct access to the Shortcuts for  
driving aids  
Short press, ignition off: system on/  
off.  
Short press, ignition on: mute/restore  
sound.  
For more information on the Heated seats  
or on the Multi-point massages, refer to the  
corresponding section.  
Swipe down from the upper edge of the  
touch screen to access a list of quick settings  
(e.g.Brightness, Diagnostics).  
Long press, ignition on: start standby  
mode (mute sound and clock display).  
Rotation: volume adjustment.  
Settings  
Main settings for the audio system,  
touch screen and digital instrument  
panel.  
Depending on the pages displayed on the  
screen, with or without the context menu,  
scroll the text by swiping with your finger, as  
with a smartphone.  
Applications  
Activation/Deactivation and configuration of the  
exterior lighting, vehicle access and safety  
Press this button to access the  
applications wall.  
functions.  
Energy  
From any page, press the touch screen  
with three or more fingers to display the  
applications wall.  
For rechargeable hybrid versions  
To obtain information about the other  
applications not listed here, refer to the sections  
describing the audio and telematic systems.  
Access to the rechargeable hybrid  
system features (energy flow, con-  
sumption history, electricity usage,  
deferred charging, e-SAVE function).  
Show/Hide context menu  
ADAS  
Activation/Deactivation and  
configuration of the driving aid  
functions.  
For electric versions  
Access to the charging system features (energy  
flow, consumption history, electricity usage,  
deferred charging).  
Return to the previous page  
Climate  
Settings for temperature, air flow, etc.  
To change the status of a function, press  
the description for the corresponding line  
(change confirmed by the slider moving to  
the right/left: function activated/deactivated).  
Energy application  
(Rechargeable hybrid or  
Electric)  
For more information on Dual-zone automatic  
air conditioning, refer to the corresponding  
section.  
Activation/Deactivation of the heated steering  
wheel.  
Access additional information on the  
function  
Energy Flow  
For more information on the Heated steering  
wheel, refer to the corresponding section.  
For rechargeable hybrid versions  
The page shows the operation of the  
rechargeable hybrid system in real time.  
Access to function parameters  
25  
Dashboard instruments  
Statistics  
on the corresponding value on the left of the  
graph.  
For rechargeable hybrid versions  
Usage  
This page shows the history of electrical energy  
and fuel consumption.  
This page shows the different types of  
consumption of the vehicle's equipment.  
1. Active driving mode  
2. Petrol engine  
3. Electric motor  
4. Estimated traction battery charge level  
The energy flows have a specific colour for each  
type of driving:  
Upper graph (blue): average electrical  
consumption for the current trip (kWh/100  
km) and historical values.  
Blue: 100% electrical energy.  
White: energy from the petrol engine.  
Green: energy recovery.  
1. Energy consumed (kWh) by the petrol  
engine (Rechargeable hybrid).  
2. Energy recovered (kWh) during  
deceleration and braking phases.  
3. Energy consumed (kWh) by the traction  
battery.  
4. Electricity used (%) by the electric motor.  
5. Electricity used (%) by thermal comfort  
equipment.  
Lower graph (grey): average fuel  
consumption for the current trip (l/100 km)  
and historical values.  
For electric versions  
The page shows the operation of the electric  
drive train in real time.  
For electric versions  
This page shows the history of electrical energy  
consumption.  
6. Electricity used (%) by other electrical  
accessories.  
Charging  
This page allows you to program deferred  
charging.  
For more information on Charging the traction  
battery, refer to the corresponding section.  
1. Active driving mode  
2. Electric motor  
3. Estimated traction battery charge level  
4. Energy flows  
Upper graph (blue): energy consumed  
directly from the traction battery.  
e-SAVE (Rechargeable hybrid)  
The e-SAVE function makes it possible to  
reserve all or part of the electrical energy of the  
traction battery to be used later during a journey  
(e.g. passing through an urban area or an area  
reserved for electric vehicles).  
Lower graph (green): energy regenerated  
during deceleration and braking phases used  
to recharge the traction battery.  
The energy flows have a specific colour for each  
type of driving:  
A.  
B.  
Blue: energy consumption  
Green: energy recovery  
The average result for the current trip is stated in  
kWh/100 km.  
It is possible to view data for the last 300, 60 or  
30 miles (500, 100 or 50 kilometres) by clicking  
Activate the function by pressing Set e-  
SAVE, then select the electric range to be  
26