Dashboard instruments -> Trip computer for Your Peugeot 408 4 Door Second Generation (2022-2026)

Dashboard instruments  
In the "Cockpit" category, press or move the  
End of trip page  
This information is also displayed  
automatically every time the ignition is  
switched on.  
slider to the desired setting.  
(Depending on version) When the ignition is  
switched off, the instrument panel automatically  
displays an additional page of the trip computer  
that recapitulates information about the last trip.  
The end of trip page contains the following  
information:  
3
Trip computer  
Displays information related to the current trip  
(e.g. range, average consumption, average  
speed, distance travelled).  
Total distance recorder  
The total distance recorder measures the total  
distance travelled by the vehicle since its initial  
registration.  
With the ignition on, the total distance is  
displayed at all times. It remains displayed for  
30 seconds after switching off the ignition. It is  
displayed when the driver's door is opened, and  
when the vehicle is locked or unlocked.  
Range.  
Data displayed on the  
instrument panel  
Trip time.  
Distance travelled.  
Percentage of the current journey travelled  
in all-electric driving mode (Hybrid or  
Rechargeable hybrid).  
Displaying the different tabs  
Average consumption.  
When travelling abroad, you may have to  
change the distance units (miles or km):  
the displayed speed must be in the local  
country’s official unit (mph or km/h).  
The unit is changed via the screen's  
configuration menu, with the vehicle  
stationary.  
Trip reset  
When the desired trip is displayed,  
press the button on the end of the  
wiper control stalk for more than 2  
seconds.  
Pressing the button located on the end of the  
wiper control stalk displays the following tabs  
in turn:  
Trips "1" and "2" are independent and are used  
in the same way.  
Rechargeable hybrid vehicles  
The total distance recorder is only  
accessible from the trip computer.  
For more information on the Trip computer,  
refer to the corresponding section.  
- Current information:  
Current consumption (Petrol or Hybrid)  
Definitions  
Percentage of the current journey travelled  
in all-electric driving mode (Petrol, Hybrid or  
Rechargeable hybrid).  
Range  
(miles or km) (Traction battery charge level  
percentage) (Electric)  
Total distance recorder (Rechargeable hybrid  
or Electric).  
Lighting dimmer  
Distance that can still be travelled with  
the fuel remaining in the tank (based  
on the average fuel consumption  
over the last few miles (kilometres)  
travelled).  
Used to manually adjust the brightness of the  
instruments and controls to suit the exterior light  
level.  
Trips "1" then "2":  
Average speed.  
Average consumption.  
Distance travelled.  
It is configured in the Settings >  
Brightness touch screen application.  
23  
Dashboard instruments  
Actual traction battery charge level and  
Average speed  
Display of visual manoeuvring aid functions.  
Interactive handbook.  
remaining range (Electric)  
(mph or km/h)  
Calculated since the last trip comput-  
er reset.  
Video tutorials (e.g. screen management,  
driving aids, voice recognition).  
This value may vary following a change in  
driving style or terrain, leading to a significant  
change in current fuel consumption.  
Audio equipment and telephone controls with  
display of associated information.  
Distance travelled  
For Petrol or Diesel versions  
(miles or km)  
Connected services and display of  
associated information.  
When the range falls below 19 miles (30 km),  
dashes are displayed.  
After filling with at least 5 litres of fuel, the range  
is recalculated and is displayed if it exceeds 62  
miles (100 km).  
Dashes appearing permanently in place of  
numbers while driving indicates a malfunction.  
Contact a dealer or a qualified workshop.  
Calculated since the last trip comput-  
er reset.  
Navigation system controls and display  
of associated information (depending on  
equipment).  
Stop & Start time counter  
Voice recognition (depending on equipment).  
(minutes/seconds or hours/minutes)  
For safety reasons, always stop the  
vehicle before performing operations  
that require sustained attention.  
Some functions are not accessible while  
driving.  
For electric versions  
Two successive alert levels indicate that the  
energy available has dropped to a low level.  
For more information on the Indicators, and in  
particular the Charge level indicator, refer to  
the corresponding section.  
If your vehicle is fitted with the Stop & Start  
function, a time counter calculates the time spent  
in STOP mode during a journey.  
The time counter is reset each time the ignition  
is switched on.  
Current consumption  
Recommendations  
(mpg or l/100 km or km/l) (miles/kWh or  
kWh/100 km or km/kWh) (Electric)  
Calculated during the last few  
seconds.  
These recommendations are valid for the touch  
screen and for the i-Toggles (depending on  
equipment).  
The touch screen and the i-Toggles screen are  
capacitive touch screens.  
10-inch touch screen  
This system gives access to the following  
elements:  
This function is only displayed at speeds above  
19 mph (30 km/h).  
Do not use pointed objects on the touch screen.  
Do not touch the touch screen with wet hands.  
Time and exterior temperature.  
Heating/air conditioning system controls and  
reminders of settings.  
Average consumption  
Use a soft, clean cloth to clean the touch  
screen.  
(mpg or l/100 km or km/l) (miles/kWh or  
kWh/100 km or km/kWh) (Electric)  
Calculated since the last trip  
computer reset.  
Settings for driving aid functions, comfort and  
safety functions, audio equipment and digital  
instrument panel.  
Main controls  
Access to one of the home pages  
Return to the first home page  
Settings of functions specific to rechargeable  
hybrid vehicles.  
24