Dashboard instruments -> Thermal comfort consumption indicator (Electric) for Your Peugeot 408 4 Door Second Generation (2022-2026)

Dashboard instruments  
For electric versions  
The remaining range is no longer  
calculated. The drive train power gradually  
decreases.  
The heating and air conditioning are switched  
off (even if the thermal comfort consumption  
indicator is not at the "ECO" level).  
To quickly heat or cool the passenger  
compartment, feel free to temporarily  
select the maximum heating or cooling  
setting.  
When the heating is on maximum, the  
thermal comfort consumption indicator  
displays "15000 w" (watts).  
Excessive use of thermal comfort equipment  
can significantly decrease the vehicle's range.  
Remember to optimise equipment settings  
upon achieving the desired level of comfort,  
and adjust them if necessary whenever you  
start the vehicle.  
After an extended period without using the  
heating, you may notice a slight odour during  
the first few minutes of use.  
The traction battery's actual charge level and  
the remaining range are displayed continuously  
when the vehicle is started.  
Thermal comfort  
consumption indicator  
(Electric)  
With the ignition off, opening the driver's  
door activates the indicator.  
It is available in the display pages of the  
instrument panel.  
Associated warning lamps  
Two successive alert levels indicate that the  
energy available has dropped to a low level:  
The indicator shows the consumption of the  
traction battery's electrical energy by the thermal  
comfort devices in the passenger compartment.  
The devices in question are the heating and air  
conditioning systems.  
1st level: Reserve  
Manual test  
The state of charge of the traction  
battery is low.  
This function allows you to check certain  
indicators and display the alerts log.  
This equipment can be used:  
If the vehicle is not plugged in, when the  
The test is launched in the Settings>  
Vehicle touch screen application.  
READY lamp is lit.  
Fixed and indicator in the red zone,  
accompanied by an audible signal.  
If the vehicle is plugged in, when the ignition  
is switched on ("Lounge" mode).  
View the remaining range on the instrument  
panel.  
Then select Safety > Diagnostics.  
Selecting ECO mode limits the performance of  
some of this equipment. The thermal comfort  
consumption indicator displays "0 w" (watts).  
Put the vehicle on charge as soon as  
possible.  
The following information is displayed on the  
instrument panel:  
2nd level: Critical  
Tyre pressures.  
The state of charge of the traction  
battery is critical.  
Engine oil level (depending on engine).  
Next service due.  
Current alerts.  
Fixed, together with the reserve warning lamp,  
accompanied by an audible signal.  
You must put the vehicle on charge.  
22