Practical information -> Free-wheeling for Your Peugeot 408 4 Door Second Generation (2022-2026)

Practical information  
tyres (tread and sidewalls) and rims as well as  
the presence of the valve caps.  
When the wear indicators no longer appear set  
back from the tread, the depth of the grooves is  
less than 1.6 mm; replace the tyres as soon as  
possible.  
Using different size wheels and tyres from those  
specified can affect the lifetime of tyres, wheel  
rotation, ground clearance, the speedometer  
reading and have an adverse effect on road  
holding.  
Fitting different tyres on the front and rear axles  
can cause the ESC to mistime.  
Always mark the direction of rotation on the tyres  
that will be stored when fitting winter or summer  
tyres. Store them in a cool, dry place and away  
from direct exposure to the sun's rays.  
A faulty timing or accessory kit can damage  
the engine, rendering it unusable. Observe the  
recommended replacement frequency, stated in  
distance travelled or time elapsed, whichever is  
reached first.  
Release procedure  
With the vehicle stationary and the engine  
running:  
Free-wheeling  
In certain situations, it is necessary to put the  
vehicle into free-wheeling mode (e.g. towing, on  
a rolling road, automatic car wash (Wash mode),  
rail or sea transport).  
Depress and hold the brake pedal.  
Select and hold the mode N on the drive  
selector.  
Press the START/STOP button around 1 s  
to switch off the engine (confirmed by the  
flashing of the P and N indicator lights).  
The procedure varies according to the type of  
gearbox and parking brake.  
Release the brake pedal to switch on the  
ignition and deactivate the electric parking  
brake.  
Never leave the vehicle unattended with  
the vehicle into free-wheeling mode.  
Winter or 4-seasons tyres can be  
identified by this symbol on their  
sidewalls.  
A message is displayed on the instrument  
panel to confirm the unlocking of the  
wheels for 15 minutes.  
Recommendations  
To be able to move the vehicle in free-wheeling  
mode, the driver absolutely must:  
When the vehicle is free-wheeling, the  
audio system cannot be updated (message  
displayed on the instrument panel).  
Shock absorbers  
Leave the engine running  
It is not easy for drivers to detect  
when shock absorbers are worn.  
Nevertheless, the shock absorbers  
have a major impact on road holding  
and braking performance.  
Put the automatic gearbox or drive selector in  
After 15 minutes or reverting to normal  
operation  
N mode.  
Manually release the electric parking brake.  
While depressing the brake pedal, restart the  
engine and select mode P.  
When the vehicle is fitted with an  
For your safety and driving comfort, it is  
important to have them regularly checked by a  
PEUGEOT dealer or a qualified workshop.  
automatic gearbox or a drive selector, it  
is strongly recommended to stay inside the  
vehicle when it is in free-wheeling mode.  
Advice on care and  
maintenance  
Timing and accessory kits  
Keyless Entry and Start  
General recommendations  
You must not depress the brake pedal  
while switching the ignition on again, then  
switching it off. If you do, the engine will start,  
requiring you to restart the procedure.  
The timing and accessory kits are  
used from the time the engine is  
started until it is switched off. It is  
normal for them to wear over time.  
Observe the following recommendations to avoid  
damaging the vehicle.  
174