Get Ease of use and comfort -> Second row seats Guide for Peugeot 5008 SUV Second Generation (2017-2023)

Ease of use and comfort

Folding from the boot

► Put the backrest 3 in the upright position and

push it ﬁrmly to latch it home.

► Check that the red indicator is no longer

visible in the release grip 1.

► Ensure that the outer seat belts were not

trapped during the operation.

Please note: an incorrectly latched

backrest compromises the safety of

passengers in the event of sudden braking or

an accident.

The contents of the boot may be thrown

forward - risk of serious injury!

► Pull the backrest release lever 2 towards you.

The backrest 3 folds fully onto the cushion.

Second row seats

Repositioning the backrests

First check that the outer seat belts are

lying vertically ﬂat alongside the backrest

latching rings.

A. Longitudinal adjustment

B. Seat backrest angle adjustment and folding

C. Folding the backrest from behind and

emergency exit for third row passengers

D. Access to third row seats

Seat adjustment

The three second row seats are independent

and of the same width. Their backrests can be

folded to adapt the boot load space.

52

Ease of use and comfort

Before and while performing the

operation on the seats, check that the

passengers, children in particular, keep their

hands and their feet far from the moving parts

of the seats (hinges, slides, etc.) - risk of

serious injury!

Longitudinal adjustment

► Lift control handle B1 and guide the backrest

backwards or forwards, raising yourself slightly

if needed.

► Release the handle and ensure the backrest

is properly locked on one of the positions oﬀered.

Central seat

3

► Lift control strap B2 and guide the backrest

backwards or forwards, raising yourself slightly

if needed.

Folding from the outside

► Release the strap and ensure the backrest is

properly locked on one of the positions oﬀered.

Flat ﬂoor

► Raise control bar A and slide the seat

forwards or backwards.

► Release the bar to lock the seat in position in

one of the notches.

Seat backrest angle adjustment

► Pull handle B1 or strap B2 until the backrest

is fully folded.

► Release the control.

► Gently push the backrest forwards so that

the backrest tilts until it is folded onto the seat

cushion.

Folding the backrests

► Check that the "aircraft" type tables of the

front seats are properly folded.

► Place the second row seats in the maximum

rear position.

Side seats

53

Ease of use and comfort

Folding from the boot

► Straighten the backrest until it locks.

Before deploying the continuity panels,

check that the 2^ndrow seats are pulled as

far back as possible.

Before performing any operations on the

rear seats, to avoid damage to the seat

belts, check that the lateral seat belts are

properly tensioned. The central seat belt must

be stored in the headlining.

Accessing third row seats

The third row seats are accessed via the second

row side seats.

Continuity panels

When loading, for example, or from the third row

seats:

► Pull strap C to unlock the desired seat and

give the backrest a slight push forwards.

Repositioning the seat

From the outside or from the third row seats:

► Check that the "aircraft" type tables of the

front seats are properly folded up.

► Pull paddle D and guide the backrest

forwards to tilt it and move the seat forwards.

To put the seat back in place:

► Straighten the backrest until the seat locks.

Whatever the initial position of the seat, it is

placed automatically a third of the way along

the longitudinal adjustment range in order to

preserve enough space for passengers in the

third row seats.

Each seat has a continuity panel at the bottom of

the backrest, which, once unfolded:

– allows for a continuous loading surface in the

boot, whatever the position of the seats,

– prevents objects from sliding beneath the 2^nd

row seats.

The continuity panels are held against the

backrests with a magnetic ﬁxing element.

These continuity panels are not designed

to support a weight greater than 30 kg.

► Place the continuity panels of the 2^ndrow

seats back against the backrests.

54

Ease of use and comfort

► Pull one of the straps; the 3 parts of the

corresponding panel fold into concertina form.

When the 3^rdrow seats are straightened, these

folded concertina panels can be left:

– either ﬂat behind the seats,

If this system fails (paddle D), the third

row passengers can also get out after

having folded the backrest of the second row

seats using strap C.

Do not let children operate the seats

unsupervised.

3

– or in the vertical position,

so allowing the seat well to be used for storage.

Positioning the seats

These operations are carried out from the boot

sill.

Third row seats

When there is a seat at the back of the boot, the

removable support is ﬁxed against the front wall

of its housing.

If the seat is removed from the back of the boot

for extra storage space, the removable support

must be installed on the two lugs on the central

wall.

The two third row seats are stored in a retracted

position in the bottom of the boot. Each one is

covered with rigid concertina panels, secured to

the vehicle.

Folding the concertina

panels

Do not let children operate the seats

unsupervised.

Each concertina panel can support a

maximum load of 100 kg with the third

row seats folded away.

With the third row seats removed and the

removable concertina panels supports

installed, the maximum load is limited to

50 kg.

► Remove the load space cover roller.

► Straighten the continuity panels of the 2^ndrow

seats.

► Fold back the concertina panels and

straighten them vertically.

► Pull the black strap E, located behind the

backrest.

The backrest tilts backwards bringing the seat

cushion with it; the seat locks in the open

position.

55

Ease of use and comfort

The load space cover roller can be stored behind

the backrests of the 3^rdrow seats.

► Put the concertina panels back above the

folded seats.

For more information on the Interior ﬁttings,

and in particular the load space cover roller, refer

to the corresponding section.

Before doing anything to the 3^rdrow

seats, straighten the continuity panels of

the 2^ndrow seats.

Do not try to fold back a seat in the 3^rdrow

without having opened it until the backrest is

fully locked.

Do not leave anything on or underneath the

3^rdrow seats when they are being folded.

Do not guide strap F when storing the seat -

your ﬁngers may get jammed!

Storing the seats

► Lift the yellow lever G, located on the right-

hand side, as far upwards as possible to unlock

the seat.

Removing the seats

Removing the right-hand seat ﬁrst is

recommended in order to facilitate access to the

left-hand seat unlocking control.

► Straighten the continuity panels of the 2^ndrow

seats.

► Put the head restraints in the low position.

► Check that the seat belts in the 3^rdrow are

properly stored along the side trims without

being folded or twisted.

► Pull red strap F, located at the bottom of the

backrest.

► While keeping the yellow lever held at the

top, raise the rear part of the seat using the red

strap F.

The seat is unlocked.

The seat must be in the folded-away position.

These operations must be performed from the

boot sill.

► Push the backrest slightly forwards.

The backrest tilts and folds back on the cushion;

the folded seat is stored at the back of its

storage area.

► Fold back the concertina panel.

56

Ease of use and comfort

► While holding it by the sides at the plastic

covers, tilt the seat forwards.

► Place the hooks located at the front of the

seat, both at the same time, onto the coloured

securing lugs on the right and left at the bottom

of the seat well.

Seat modularity

3

Conﬁguration examples

Check that the front hooks of the seat are

properly positioned on the two lugs.

If they are not, you must remove the seat and

start the procedure again.

► Once the rear part of the seat has been

raised, take hold of each side of the seat

cushion, at the plastic covers, then bring the seat

towards you, keeping it at the same angle.

Repositioning the seats

These operations must be performed from the

boot sill.

7 seats

5 seats

Transport of

objects

As long as the seat is not in the correct

position, it must be held with both hands

by the sides, keeping it folded.

► Release the rear part of the seat which will

lock in place under its own weight.

The yellow lever G folds automatically.

► Check in advance that the seat storage well

is empty and that the removable support is

properly secured against the front wall.

If the seat is not perfectly horizontal, do

not press on the backrest and do not

try to unfold it - risk of damaging the

mechanism!

Take out the seat and start the operation

again.

6 seats

4 seats

By folding the second row seats and

retracting the third row seats, you obtain

57

Ease of use and comfort

a continuous storage ﬂoor through to the back

of the front seats.

Air distribution

regulate the automatic air conditioning

system.

By placing the front passenger seat in the

table position, you obtain a continuous

storage ﬂoor through to the dashboard.

► Operate the air conditioning system for at

least 5 to 10 minutes once or twice a month to

keep it in perfect working order.

► If the system does not produce cold air,

switch it oﬀ and contact a PEUGEOT dealer

or a qualiﬁed workshop.

Operations on the seats must only be

done when the vehicle is stationary.

When towing the maximum load on a steep

gradient in high temperatures, switching oﬀ

the air conditioning increases the available

engine power, enhancing the towing capacity.

Heating and Ventilation

Air intake

1. Windscreen demisting/defrosting vents

2. Front side window demisting/defrosting vents

3. Adjustable and closable side air vents

4. Adjustable and closable central air vents

5. Air outlets to the front footwells

6. Air outlets to the rear footwells

7. Adjustable and closable air vents, with blower

(depending on version)

Avoid driving for too long with the

ventilation oﬀ or with prolonged operation

of interior air recirculation. Risk of misting and

deterioration of the air quality!

The air circulating in the passenger compartment

is ﬁltered and originates either from the

exterior, via the grille located at the base of the

windscreen, or from the inside in air recirculation

mode.

If the interior temperature is very high

after the vehicle has stood for a long

time in the sunshine, air the passenger

compartment for a few moments.

Put the air ﬂow control at a setting high

enough to quickly change the air in the

passenger compartment.

Controls

Depending on version, the controls are

accessible in the "Air conditioning" touch

screen menu or are grouped together in the

control panel on the centre console.

Advice

Using the ventilation and air

conditioning system

► To ensure that air is distributed evenly,

keep the external air intake grilles at the base

of the windscreen, the nozzles, the vents, the

air outlets and the air extractor in the boot

free from obstructions.

Condensation created by the air

conditioning results in a discharge of

water underneath the vehicle. This is perfectly

normal.

► Do not cover the sunshine sensor located

on the dashboard; this sensor is used to

58

Ease of use and comfort -> Second row seats for Your Peugeot 5008 SUV Second Generation (2017-2023)

Related Topics

Ease of use and comfort