2017-2023 Peugeot 5008 SUV Ease of use and comfort -> Boot fittings User Manual

MY CAR USER MANUAL

Ease of use and comfort -> Boot fittings for Your Peugeot 5008 SUV Second Generation (2017-2023)

Ease of use and comfort  
Side blinds  
2. 12 V accessory socket (max. 120 W)  
3. Boot lamp  
4. Rear seat folding controls  
5. Hooks  
6. Stowing rings  
7. Adjustable boot floor (2-position)  
8. Storage well/Tool box under the floor  
9. Open storage compartments  
Depending on version, the storage boxes are  
fitted in the floor, at the foot of the side seats on  
the second row.  
On the left-hand side, it may also contain the  
temporary puncture repair kit.  
► To open them, lift the cover by the notch.  
Boot fittings  
Fitted to the second row windows, they protect  
the passenger compartment from the sun's rays.  
► Pull the central tab to unroll the blind.  
► Position the blind's clip on the hook.  
Always guide the blind slowly, using the  
tab, while raising or lowering it.  
1. Load space cover roller  
2. 12 V accessory socket (max. 120 W)  
3. Boot lamp  
Storage boxes  
4. Luggage retaining strap  
5. Storage brackets of the load space cover  
roller  
6. Armrest with cup holder and storage  
compartment  
7. Open storage compartment  
1. Load space cover shelf  
72  
Ease of use and comfort  
– a movable section which rises when the boot  
is opened, with an open storage space.  
In the 5-seat configuration, it is installed behind  
the second row seats, with the third row seats  
stored folded away.  
In the 7-seat configuration, it is stored behind the  
third row seats.  
8. Concertina panels  
9. Stowing rings  
3
The stowing rings are designed to secure  
luggage using different types of retaining  
nets.  
These retaining nets are available as an  
option or as an accessory.  
In the event of sudden deceleration,  
objects placed on the load space cover  
roller can turn into projectiles.  
For more information, contact a PEUGEOT  
dealer.  
Installation  
For information on installing the High load  
retaining net, refer to the corresponding  
section.  
To remove the load space cover shelf:  
► Unhook the two cords.  
► Raise the movable section slightly, then  
unclip it on each side.  
Load space cover shelf  
► Unclip the fixed section on each side, then  
take out the load space cover shelf.  
The load space cover shelf can be stowed under  
the boot floor.  
In the event of sudden deceleration,  
objects placed on the load space cover  
shelf can turn into projectiles.  
► Position the left-hand and right-hand ends of  
the load space cover roller in the cut-outs A, with  
the moving flap at the front.  
► Unwind the roller until it reaches the boot  
pillars.  
► Insert the guides of the roller into the rails in  
pillars B.  
Load space cover roller  
It consists of two sections:  
– a fixed section with an open storage space.  
73  
Ease of use and comfort  
Removal  
► Position the load space cover roller in the  
space located above the armrest, one side after  
the other, tilting it slightly.  
► Slide the load space cover roller as far as  
possible, until it reaches the notches at the back  
of the boot, with the two hinges facing down.  
► Unfold the third row seats.  
The folded concertina panels can be placed in  
the horizontal or upright position.  
To fold the third row seats with the load space  
cover roller stored at the back, it is necessary  
to raise the concertina panels in order to give  
access to the seat unlocking controls (red  
straps).  
► Remove the roller guides from the rails in  
pillars B.  
► Guide the roller as it reels in.  
► Unlock the roller by pressing one of the  
handles located at the ends of the roller bracket.  
High load retaining net  
Storage behind the 3rd row seats  
► Make sure that the third row seats are folded.  
► Fold the first two concertina panels.  
74  
Ease of use and comfort  
► Attach the net’s straps to the lower anchorage Behind the front seats  
points, located directly below the fixings of the  
rear bench seat cushion.  
This removable net allows the entire loading  
volume up to the roof to be used:  
– behind the front seats (1st row) when the rear  
seats are folded down.  
– behind the rear seats (2nd row) when the load  
space cover is removed.  
3
► Pull on the straps to stretch the net.  
Once fitted, the net does not prevent  
tipping of the rear backrests.  
It protects the occupants in case of  
sudden braking.  
Behind the rear seats  
► Fold down the rear seats.  
► Insert the ends of the bar, one after the other,  
into the fixing points in the roof.  
Behind the front seats  
(Depending on version)  
► Remove the caps from the Top Tether fixings.  
► Attach the net’s straps to the lower anchorage  
points, located in the housing of the Top Tether  
fixings.  
► Pull on the straps to stretch the net.  
► Remove the load space cover.  
► Remove the trim covers on each side,  
located in the upper section in the roof.  
► Position the net's upper hooks in the roof.  
► Attach the straps of the net to the lower rings,  
located on each side trim of the boot.  
► Pull on the straps to stretch the net.  
► Fold down the rear seats.  
► Remove the trim covers on each side,  
located in the upper section in the roof.  
► Position the net's upper hooks in the roof.  
75  
Ease of use and comfort  
Behind the rear seats  
On certain versions, the adjustable boot  
floor cannot be fitted in the low position.  
To change the height:  
► Lift and pull the floor towards you using its  
central handle, then use the lateral stops to  
move it.  
► Push the floor all the way forwards to place it  
in the desired position.  
► Remove the load space cover roller.  
► Insert the ends of the bar, one after the other,  
into the fixing points in the roof.  
► Attach the straps of the net to the lower rings,  
located on each side trim of the boot.  
► Pull on the straps to stretch the net.  
2-position boot floor  
To keep it in the inclined position:  
► From the high position, lift the floor towards  
the load space cover.  
► Fully raise the boot floor to access the  
storage well.  
Depending on version, it includes:  
– A temporary puncture repair kit with the tool  
kit.  
– A spare wheel with the tool kit.  
– The battery charging cable (Hybrid).  
The load space cover can also be stowed here.  
► Take it past the retractable stops, then rest  
the floor on these stops.  
This two-position floor allows the boot volume to  
be optimised using the lateral stops located on  
the sides:  
– High position (100 kg max.): to obtain a flat  
floor up to the front seats, when the rear seats  
are folded down.  
Storage well  
– Low position (150 kg max.): maximum boot  
volume.  
76  
Ease of use and comfort  
12 V accessory socket  
► To connect a 12 V accessory (maximum  
power: 120 W), lift the cover and plug in a  
suitable adaptor.  
3
► Switch on the ignition.  
The connection of an electrical device  
not approved by PEUGEOT, such as a  
USB charger, may adversely affect the  
operation of vehicle electrical systems,  
causing faults such as poor radio reception or  
interference with displays in the screens.  
Boot lamp  
It comes on automatically when the boot is  
opened and goes off automatically when the  
boot is closed.  
The lighting time varies according to the  
circumstances:  
– When the ignition is off, approximately 10  
minutes.  
– In energy saving mode, approximately 30  
seconds.  
– With the engine running, unlimited.  
77  

Related Topics

Ease of use and comfort

Driving position
Front seats
Steering wheel adjustment
Mirrors
Second row seats
Heating and Ventilation
Front demisting - defrosting
Heated windscreen
Rear screen demisting/defrosting
Front fittings
Rear fittings