Get Ease of use and comfort -> Mirrors Guide for Peugeot 5008 SUV Second Generation (2017-2023)

Ease of use and comfort

► Next, proceed with the passenger's seat in

the same way.

Mirrors

3

► Move control A to the right or to the left to

select the corresponding mirror.

► Move control B in any of the four directions

to adjust.

The changes are applied immediately.

Once activated, the system starts a one hour

massage cycle, made up of sequences of 6

minutes of massage followed by 3 minutes at

rest.

Door mirrors

As a safety measure, the mirrors should

► Return control A to its central position.

be adjusted to reduce the "blind spots".

The objects that you see in the mirrors are

in fact closer than they appear. Take this

into account in order to correctly judge the

distance of vehicles approaching from behind.

Manual folding

The mirrors can be folded manually (parking

obstruction, narrow garage, etc.).

The system automatically stops at the end of the

cycle; the indicator lamp for the button goes oﬀ.

► Turn the mirror towards the vehicle.

Steering wheel

adjustment

Demisting/Defrosting

Electric folding

Depending on equipment, the mirrors can be

folded electrically, when the vehicle is parked.

If the vehicle is so equipped, demisting/

defrosting of the heated door mirrors is

performed when the heated rear screen is

switched on.

For more information on Rear screen

demisting/defrosting, refer to the

corresponding section.

► From the inside, with the

ignition on, place control A in the

central position.

► Pull control A backwards.

► Lock the vehicle from the outside.

► When stationary, pull the control to release

the steering wheel.

Adjustment

Electric unfolding

► Adjust the height and reach to suit your

driving position.

► Push the control lever to lock the steering

wheel.

► From outside: unlock the vehicle.

► From inside: with the ignition on, place

control A in the central position and then pull it

rearwards.

As a safety measure, these adjustments

must only be carried out with the vehicle

stationary.

Depending on version, the automatic

door mirror folding/unfolding function is

49

Ease of use and comfort

conﬁgured via the Driving / Vehicle touch

screen menu.

► Pull the lever to change to the anti-dazzle

"night” position.

Rear head restraints

Otherwise, this setting can be carried out at a

PEUGEOT dealer or a qualiﬁed workshop.

► Push the lever to change to the normal "day"

position.

Adjustment

► Set the mirror to the normal “day” position.

Automatic tilting in reverse gear

Depending on version, this function allows to

automatically tilt the mirrors downwards to assist

with parking manoeuvres in reverse gear.

With the engine running, on engaging reverse

gear, the mirror glasses tilt downwards.

They return to their initial position:

– A few seconds after coming out of reverse

gear.

– Once the vehicle speed exceeds 6 mph

(10 km/h).

– When the engine is switched oﬀ.

This function is set via the Driving/

Vehicle touch screen menu.

Automatic "electrochrome" model

This system automatically and progressively

transitions between day and night modes, using

a sensor that measures the light entering from

the rear of the vehicle.

To ensure optimum visibility during your

manoeuvres, the mirror lightens

automatically when reverse gear is engaged.

Interior rear view mirror

Manual model

Day/night position

High position (use):

► Pull the head restraint fully up.

Low position (stowing; when the seats are not

in use):

► Press the lugs A to release the head restraint

and push it down.

50

Ease of use and comfort

The folding of the backrest is

accompanied by a slight lowering of the

corresponding cushion.

To obtain a ﬂat surface, it is necessary to

place the adjustable boot ﬂoor in the high

position.

When the backrest is released, the red

indicator in the release grip is visible.

The rear head restraints can be removed.

Folding the backrests

3

Removing a head restraint

► Pull the head restraint fully up.

► Press the lugs A to release the head restraint

and remove it completely.

► Store the head restraint.

Reﬁtting a head restraint

► Insert the head restraint rods into the guides

in the corresponding seat backrest.

► Push the head restraint down as far as it will

go.

Folding from the passenger

compartment

► Press the lugs A to release the head restraint

and push it down.

Each section of the backrest has two release

controls:

– a grip 1 on the outer edge of the backrest,

– a lever 2 on the boot side trim.

Never drive with passengers seated at

the rear when the head restraints are

removed; the head restraints should be in

place and in the high position.

Manoeuvring the seat backrests should

only be done when the vehicle is

stationary.

The head restraint for the central

seat and those for the side seats

are not interchangeable.

First steps:

► Lower the head restraints.

► Lift up the rear armrest.

► Press the backrest release grip 1.

► Guide the backrest 3 down to the horizontal

position.

► If necessary, move the front seats forward.

► Check that no person or object will interfere

with folding down the backrests (clothing,

luggage, etc.).

Rear bench seat

► Check that the outer seat belts are lying ﬂat

on the backrests.

► Check that the centre seat belt buckle is

stored in its housing.

Bench seat with ﬁxed cushions and split folding

backrests (2/3-1/3) to adapt the boot load space.

51

Ease of use and comfort

Folding from the boot

► Put the backrest 3 in the upright position and

push it ﬁrmly to latch it home.

► Check that the red indicator is no longer

visible in the release grip 1.

► Ensure that the outer seat belts were not

trapped during the operation.

Please note: an incorrectly latched

backrest compromises the safety of

passengers in the event of sudden braking or

an accident.

The contents of the boot may be thrown

forward - risk of serious injury!

► Pull the backrest release lever 2 towards you.

The backrest 3 folds fully onto the cushion.

Second row seats

Repositioning the backrests

First check that the outer seat belts are

lying vertically ﬂat alongside the backrest

latching rings.

A. Longitudinal adjustment

B. Seat backrest angle adjustment and folding

C. Folding the backrest from behind and

emergency exit for third row passengers

D. Access to third row seats

Seat adjustment

The three second row seats are independent

and of the same width. Their backrests can be

folded to adapt the boot load space.

52

Ease of use and comfort -> Mirrors for Your Peugeot 5008 SUV Second Generation (2017-2023)

Related Topics

Ease of use and comfort