Download User Manual App

Quickly access user manual for free!

Lighting and visibility -> Automatic headlamp dipping for Your Peugeot 5008 SUV Third Generation (2024-2025)

Lighting and visibility  
– The dipped beam head-  
lamps remain lit. These in-  
dicator lamps light up on  
the instrument panel.  
This system is a driving aid.  
Automatic headlamp  
dipping  
The driver remains responsible for the  
vehicle's lighting, its correct use in the  
prevailing light, visibility and traffic conditions,  
and for compliance with driving and vehicle  
regulations.  
The function is deactivated if the foglamps are  
switched on.  
When the foglamps are switched off, the function  
is automatically reactivated.  
For more information, refer to  
the General recommendations for  
automatic lighting systems.  
The system becomes operational when  
the vehicle exceeds 28 mph (45 km/h).  
When the speed falls below 22 mph (35  
km/h), the system is no longer operational.  
This indicator lamp goes out when  
the function is deactivated.  
With the ring of the lighting control stalk in  
the "AUTO" position and the function activated  
on the touch screen, this system automatically  
switches between dipped and main beam  
headlamps, according to lighting and traffic  
conditions, using a camera located at the top of  
the windscreen.  
Activation/Deactivation  
Pause  
It is configured in the Settings > Ve-  
hicle touch screen application.  
If the situation requires a change of headlamp  
beam, the driver can take over at any time.  
Switch the headlamps manually between  
dipped and main beam to pause the function.  
If the "AUTO" and "Dipped beam" indicator  
lamps were on, the system changes to main  
beam.  
The state of the system is stored when the  
ignition is switched off.  
When the system detects thick fog, it  
temporarily deactivates the function.  
If the "AUTO" and "Main beam" indicator lamps  
were on, the system changes to dipped beam.  
Operation  
If the ambient light level is very low and traffic  
conditions permit:  
To reactivate the function, once again switch  
the headlamps manually between dipped and  
main beam.  
– The main beam head-  
lamps come on automat-  
ically. These indicator  
lamps light up on the in-  
strument panel.  
Malfunction  
If a malfunction occurs with the sys-  
tem or the camera, this warning lamp  
lights up on the instrument panel, ac-  
companied by an audible signal and  
a message.  
If the ambient light level is sufficient and/or the  
traffic conditions do not allow the main beam  
headlamps to be lit:  
74