Lighting and visibility
Headlamp dipping
Exterior lighting control
stalk
Main lighting
► Rotate the ring forwards/backwards to turn
them on/off.
► To select the main lighting mode: turn the ring
up/down to the desired position.
► Pull the lighting control stalk to switch
between dipped and main beam headlamps.
When the lighting is switched off automatically
("AUTO" position) the foglamps and the dipped
beam headlamps remain on.
When the rear foglamps are activated, the "fog"
mode of the Adaptive Frontlight System function
can be activated at the front.
In "AUTO" and sidelamps mode, pull the lighting
control stalk to switch the main beam headlamps
on directly ("headlamp flash").
Display
Illumination of the corresponding indicator lamp
on the instrument panel confirms that the
selected lighting is on.
For more information on the Adaptive
Frontlight System, refer to the corresponding
section.
A fault with a lamp is signalled by the
permanent illumination of this warn-
ing lamp, accompanied by the dis-
play of a message and an audible
signal.
Switching on the foglamps is prohibited
in clear weather or in rain, both day and
night. In these situations, the power of their
beams may dazzle other drivers. They must
only be used in fog or falling snow (rules may
vary depending on country).
Sidelamps only
Automatic illumination of lamps/day-
time running lamps
Rear foglamps
Do not forget to switch off the foglamps when
they are no longer necessary.
They only work if the dipped or main
beam headlamps are on.
Dipped or main beam
headlamps
Switching off of the lighting when the
ignition is switched off
When the ignition is switched off, all of
the lamps turn off immediately, except for
the dipped beam headlamps if automatic
guideme- home lighting is activated.
70
English 