Child safety
"ISOFIX" MOUNTINGS
the ISOFIX child seats are fitted with two
latches which are secured easily on the two
front rings A.
Some also have an upper strap which is
attached to the rear ring B.
Your vehicle has been approved in
accordance with the latest ISOFIX
regulation.
the mountings comprise three rings for each
rear bench side seat:
the incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
Observe in full the fitting instructions in the
installation handbook provided with the child
seat.
-
two front rings A, located between the
vehicle seat back and cushion,
to attach this strap:
-
a rear ring B, for securing the upper strap
referred to as the tOP tetHeR.
-
remove and stow the head restraint
before fitting the child seat to this seat
(refit it once the child seat has been
replaced),
Refer to the summary table showing
the installation possibilities for ISOFIX
child seats in your vehicle.
the top tether is used to secure the upper
strap of child seats that have one. this
arrangement reduces the forward tipping of
the child seat in the event of a front impact.
this ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in
your vehicle.
-
pass the strap of the child seat over the
top of the seat backrest, between the
head restraint rod apertures,
-
-
attach the hook on the strap to the rear
ring,
tighten the top strap.
English 
