Advanced Driving Assistance Systems (ADAS)
Have the cause of the fault remedied by a
workshop.
Anti-lock Brake Warning
Light
Warning
6
Side blind spot alert does not replace
driver vision.
The system does not detect:
Braking Performance
Assistance System
illuminates yellow.
-
vehicles outside the side blind zones
which may be rapidly approaching
Illuminates for a few seconds after the ignition is
switched on. The system is ready for operation
when the control indicator extinguishes.
-
pedestrians, cyclists or animals
Anti-lock Brake System
(ABS) / Electronic Brake
Force Distribution (EBFD)
These systems enhance the vehicle’s stability
and handling during braking, and enable greater
control while cornering, particularly on poor or
slippery road surfaces.
If
does not extinguish after a few seconds, or
Before changing a lane, always check all
mirrors, look over the shoulder and use the
turn signal.
if it illuminates while driving, there is a fault in the
ABS. The brake system remains operational but
without ABS regulation.
Activation
If
illuminates together with
, a fault with
The system can be activated via the vehicle
settings menu in the Info Display.
the electronic brake force distribution has been
detected.
Stop engine immediately and seek the
assistance of a workshop.
ABS prevents wheel locking in the event of
emergency braking.
Functionality
Electronic brake force distribution (EBFD)
manages overall braking pressure on each
individual wheel.
Visibility Enhancement
Assistance System
► When braking in an emergency, depress the
pedal very firmly and maintain this pressure.
Side Blind Spot Alert
(SBSA)
The side blind spot alert system detects and
reports objects on either side of the vehicle,
within a specified blind spot zone. The system
displays a visual alert in each exterior mirror,
when detecting objects that may not be visible in
the interior and exterior mirrors.
NOTE:
Normal operation of the ABS may make itself felt
by slight vibrations of the brake pedal.
The fixed illumination of this warning lamp
signals that there is a fault with the ABS.
The vehicle retains conventional braking. Drive
carefully at a moderate speed.
This warning lamp, when lit together with the
STOP and ABS warning lamps, accompanied by
a message and an audible signal, indicates an
EBFD malfunction.
When the system detects a vehicle in the side
blind zone while driving forwards, an LED will
illuminate in the relevant exterior mirror.
The LED comes on immediately when being
passed.
Side blind spot alert uses some of the parking
assist sensors which are located in the front and
rear bumper on both sides of the vehicle.
You must stop the vehicle.
Stop as soon as it is safe to do so and switch off
the ignition.
The LED comes on after a delay when passing
another vehicle slowly.
139