Driving
Pay particular attention:
– When motorcycles are present and
when there are vehicles staggered across the
traffic lane.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
With this button, you can select a memorised
speed setting to use with the speed limiter or the
programmable cruise control.
For more information on the Speed limiter or
Programmable cruise control, refer to the
corresponding section.
Memorising speeds
– When entering a tunnel or crossing a
bridge.
This function, used only for the speed limiter
and programmable cruise control, lets you
save speed settings that will subsequently be
proposed for the purpose of configuring these
two systems.
If any of the following malfunctions
occurs, do not use the system:
– Following an impact on the windscreen
close to the camera.
Active Safety Brake with
Collision Risk Alert and
Intelligent emergency
braking assistance
You can memorise multiple speed settings for
each of the two systems.
By default, some speed settings are already
memorised.
– Brake lamps not working.
If the vehicle has undergone any of the
following modifications, do not use the
system:
– Carrying long objects on roof bars or a roof
rack.
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids.
As a safety measure, the driver must only
change speed settings when stationary.
Changing a speed setting
– Towing.
Speed settings can be activated,
deactivated, selected and changed in the
Driving / Vehicle touch screen menu.
– Front end of the vehicle modified (for
example by adding long-range headlamps or
painting the front bumper).
– Obstructed radar.
This system:
– warns the driver that their vehicle is at risk of
collision with the vehicle in front.
– reduces the vehicle's speed to avoid a
collision or limit its severity.
"MEM" button
Malfunction
In the event of a malfunction,
dashes are displayed instead of
the speed setting.
The system also takes motorcyclists and
animals into account; however, animals
below 0.5 m tall and objects on the road are
not necessarily detected.
This warning lamp comes on,
accompanied by a message and an
audible signal, to confirm the malfunction.
This system is comprised of three functions:
150