Driving
► Switch on the speed limiter/cruise control.
The speed limiter/cruise control information is
displayed.
This system prevents the vehicle from
exceeding the speed programmed by the
driver (speed setting).
Upon detecting a sign suggesting a new speed
setting, the system displays the value and
"MEM" flashes for a few seconds, prompting you
to save it as a new speed setting.
The speed limiter is switched on manually.
The minimum speed setting is 19 mph (30 km/h).
The speed setting remains in the system
memory when the ignition is switched off.
This additional system recognises these road
signs and displays them on the instrument panel
if the appropriate display mode is selected:
– No entry: when entering a lane in the wrong
direction, an alert message, including the symbol
of this sign, is displayed on the instrument panel
(request to check the direction of traffic).
– Other signs: as you approach it, the symbol
of the corresponding sign is displayed on the
instrument panel.
If there is a difference of less than 6 mph
(9 km/h) between the speed setting and
the speed displayed by the Road signs
recognition, the "MEM" symbol is not
displayed.
Steering-mounted control
Depending on the road conditions, several
speeds may be displayed.
► Press button 2 once to save the suggested
speed value.
A message is displayed, confirming the request.
► Press button 2 again to confirm and save the
new speed setting.
The actual road signs always take priority
over those displayed by the system.
The signs must comply with the Vienna
Convention on road signs.
1. ON (LIMIT position)/OFF (position 0)
2. Reduce the speed setting
3. Increase the speed setting
4. Pause/resume speed limiter with the speed
setting previously stored
Activation/Deactivation
The display then reverts to its previous state.
The settings are changed via
the Driving/Vehicle touch screen
menu.
Extended Traffic Sign
Recognition
5. Depending on version:
Display the speed thresholds saved using the
Memorising speeds function
or
Use the speed suggested by the Road signs
recognition (MEM display)
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids.
Speed limiter
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids.
6. Display and adjustment of the programmed
inter-vehicle distance
142
English 
