Driving
With the ignition on, this system uses a camera
located near the third brake lamp to display
a view of the rear of your vehicle on the
reproduction screen (if it is a panel van or has a
solid partition).
bicycle carrier is connected to a towing device
installed in accordance with the
manufacturer's recommendations.
In this case, the outline of a trailer is displayed
at the rear of the image of the vehicle.
Deactivation/Activation
Without touch screen
6
The reversing camera is activated automatically
when reverse gear is engaged. The image
is displayed on the reproduction screen. The
reproduction screen switches off when the
gearbox is in neutral or in a forward gear.
The parking sensors are deactivated while the
Park Assist function is measuring a space.
For more information on the Park
Assist function, refer to the corresponding
section.
Operating limits
If the boot is heavily loaded, the vehicle may tilt,
► To deactivate or activate the system, press
this button.
The indicator lamp is on when the system is
deactivated.
affecting distance measurements.
Malfunction
With touch screen
In the event of a malfunction when
changing into reverse gear, this warning
lamp lights up on the instrument panel,
accompanied by the display of a message and
an audible signal (short beep).
The settings are changed via
the Driving/Vehicle touch screen
menu.
The status of the function is saved when the
ignition is switched off.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
The blue lines 1 represent the general direction
of the vehicle (the gap corresponds to the width
of your vehicle with the mirrors).
Reversing camera
The red line 2 represents a distance of about
30 cm beyond the edge of your vehicle's rear
bumper.
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids.
The rear parking sensors system will be
deactivated automatically if a trailer or
161
English 
