Advertisement

Download User Manual App

Quickly access user manual for free!

Driving -> Blind spot monitoring for Your Peugeot Partner Van Third Generation (2015-2023)

Driving  
– Lane markings worn, hidden (snow, mud)  
or multiple (roadworks, etc.),  
– Close proximity to the vehicle in front (lane  
markings may not be detected).  
Deactivation is signalled by the lighting of  
the indicator lamp in the button and this  
warning lamp on the instrument panel.  
The system is automatically reactivated every  
time the ignition is switched on.  
Operating limits  
The system goes into standby automatically in  
the following cases:  
– ESC deactivated or operation triggered.  
– Speed below 43 mph (70 km/h) or greater  
than 112 mph (180 km/h).  
– Electrical connection to a trailer.  
– Use of a"space-saver" spare wheel detected  
(as detection is not immediate, deactivation of  
the system is recommended).  
– Dynamic driving style detected, pressure on  
the brake or accelerator pedal.  
– Driving over lane markings.  
– Activation of the direction indicators.  
– Crossing the inside line on a bend.  
– Driving on a tight bend.  
– Inactivity by the driver detected during  
correction.  
– Roads that are narrow, winding.  
Malfunction  
Risk of undesirable operation  
The system should be deactivated in the  
following situations:  
– When changing a wheel or working near a  
wheel.  
Towing or with a bicycle carrier on a towing  
device, especially with trailer not plugged in or  
not approved.  
– Road in poor condition, unstable or with very  
poor grip (risk of aquaplaning, snow, ice).  
– Adverse weather conditions.  
– Driving on racing circuits.  
In the event of a malfunction,  
these warning lamps light up on  
the instrument panel, accompanied by the  
display of a message and an audible signal.  
Have it checked by a PEUGEOT dealer or a  
qualified workshop.  
Blind spot monitoring  
For more information, refer to the  
General recommendations on the use  
of driving and manoeuvring aids.  
– Driving on a rolling road.  
During a correction, if the driver is  
inactive (not holding the steering wheel  
for 10 seconds), a warning message appears.  
If the driver remains inactive (not holding  
the steering wheel for 2 more seconds),  
correction is stopped.  
Deactivation/Activation  
The following situations may interfere  
with the operation of the system or  
prevent it from working:  
– Insufficient contrast between the road  
surface and the verge or hard shoulder  
(e.g. shade).  
This system warns the driver of a potential  
danger posed by the presence of another vehicle  
(car, lorry, motorcycle) in the vehicle's blind  
► Press this button to deactivate/reactivate the  
system at any time.  
156