Get Safety -> Locations for child seats (Seat belt/ISOFIX) Guide for Peugeot Traveller Van First Generation (2016-2026)

Safety

Locations for child seats secured with a seat belt

In line with european legislation, this table indicates the options for installing child seats secured using a seat belt and universally approved (a) for the

weight of the child and the seat in the vehicle.

Weight of the child and indicative age

Under 13 kg

(groups 0 (b)

and 0+)

From 9 to 18 kg

(group 1)

1 to 3 years

approx

From 15 to 25 kg From 22 to 36 kg

Seat

(group 2)

3 to 6 years

approx

(group 3)

6 to 10 years

approx

up to approx 1 year

With individual

seat,

passenger seat

U

X

U

X

U

X

U

X

U

5

With bench seat,

outer seat

Row 1 (c) (d)

With bench seat,

centre seat

outer seats

Centre seat

outer seats

Centre seat

Row 2 (e) (f)

Row 3 (e) (f)

181

Safety

(a) universal child seat: child seat that can be

installed in any vehicle using the seat belt.

(b) group 0: from birth to 10 kg. Infant car

seats and "car cots" cannot be installed on

the front passenger seat.

(c) Consult the legislation in force in your

country before installing your child on this

seat.

U

X

Seat suitable for the installation of a child

seat secured using the seat belt and

universally approved, rearward facing and/

or forward facing.

Seat not suitable for the installation of a

chld seat of the weight group indicated.

Remove and stow the head restraint

before installing a child seat with

backrest on a passenger seat.

Refit the head restraint once the child

seat has been removed.

(d) When a rearward facing child seat is

installed on the front passenger seat,

the front passenger airbag must be

deactivated. otherwise the child risks

being seriously injured or even killed if the

airbag is deployed.

When a forward facing child seat is

installed on the front passenger seat, the

front passenger airbag must remain active.

(e) To install a child seat on a rear seat, move

the seat in front forward, then straighten

the backrest to leave sufficient space for

the child seat and the child's legs.

(f) To install a child seat on a rear seat,

rearward facing or forward facing, adjust

the rear seat to the fully back position with

the backrest straightened.

182

Safety

"ISoFIX" mountings

This ISoFIX mounting system provides fast,

reliable and safe fitting of the child seat in your

vehicle.

The ISoFIX child seats are fitted with two

latches which are secured on the two front

rings A.

Some also have an upper strap which is

attached to the rear ring B.

To secure the child seat to the Top Tether:

-

fix the hook on the end of the upper strap

to the rear ring B,

tighten the upper strap.

5

Your vehicle has been approved to the latest

ISoFIX regulation.

If fitted on your vehicle, the regulation ISoFIX

mountings are located by labels.

The mountings comprise three rings for each

seat:

The incorrect installation of a child seat

in a vehicle compromises the child's

protection in the event of an accident.

-

Two front rings A, located between

the vehicle seat backrest and cushion,

indicated by an "ISoFIX" marking,

-

remove and stow the head restraint before

installing a child seat on this seat (refit it

once the child seat has been removed),

pass the child seat upper strap over the

top of the seat backrest, between the

apertures for the head restraint rods,

observe strictly the fitting instructions

provided with the child seat.

-

If fitted to your vehicle, a rear ring B,

located behind the vehicle's seat, called

the Top Tether, for securing the upper

strap, indicated by a "Top Tether" marking.

-

For information on the possibilities for

installing ISoFIX child seats in your

vehicle, refer to the locations table.

The Top Tether is used to secure the upper

strap of child seats that have one. In the event

of a front impact, this system limits the forward

tipping of the child seat.

183

Safety

ISoFIX child seats recommended by PeugeoT

PeugeoT offers a range of ISoFIX child seats listed and type approved for your vehicle.

Refer also to the child seat manufacturer's fitting instructions for information on installing and removing the seat.

Baby P2C Mini and its ISOFIX base

(size categories: C, D, E)

"RÖMER Baby-Safe Plus" and its ISOFIX base

FAIR Bimbofix ISOFIX and its ISOFIX base

(size category: E)

(size category: C or A)

Group 0+: from birth up to 13 kg

Group 1: from 9 to 18 kg

Group 0+: from birth to 13 kg

Can be installed forward facing or rearward

facing using an ISoFIX base which is

attached to the rings A.

The base includes a support leg which

extends down to the floor of the vehicle.

6 seat body angle positions.

This child seat can also be used in a forward

facing position on seats not fitted with

ISoFIX mountings.

In this case, it must be secured to the vehicle

seat by the three-point seat belt.

Installed rearward facing using an ISoFIX

base which is attached to the rings A.

The base has a support leg, adjustable for

height, which sits on the vehicle's floor.

This seat can also be secured with a seat

belt.

In this case only the seat shell is used and is

attached to the vehicle's seat by the three-

point seat belt.

Installed rearward facing using an ISoFIX

base which is attached to the rings A.

The base has a support leg, adjustable for

height, which sits on the vehicle's floor.

This child seat can also be secured with a

seat belt. In this case, only the shell is used

and attached to the vehicle's seat by the

three-point seat belt.

Adjust the front seat of the vehicle so that the

child's feet do not touch the backrest.

184

Safety

"Baby P2C Midi" and its ISOFIX base

(size categories: D, C, A, B, B1)

"RÖMER Duo Plus ISOFIX"

(size category: B1)

Group 1: from 9 to 18 kg

Installed rearward facing using an ISoFIX

base which is attached to the rings A.

The base has a support leg, adjustable for

height, which sits on the vehicle's floor.

This child seat can also be used forward

facing.

This seat can not be secured with a seat

belt.

We recommend that you use the seat in the

rearward facing position up to the age of

3 years.

Is installed only in the forward facing

position.

Is attached to the rings A and the upper

ring B, referred to as the ToP TeTHeR,

using an upper strap.

5

Three seat body angles: sitting, reclining,

lying down.

This child seat can also be used on seats

not equipped with ISoFIX mountings. In

this case, it must be secured to the vehicle's

seat by the three-point seat belt. Adjust the

position of the vehicle's front seat so that the

child's feet are not touching the backrest.

185

Safety

Locations for ISoFIX child seats

In line with european Regulations, this table indicates the options for installing ISoFIX child seats on seats in the vehicle fitted with ISoFIX mountings.

In the case of universal and semi-universal ISoFIX child seats, the ISoFIX size category, determined by a letter from A to G, is indicated on the child

seat next to the ISoFIX logo.

Weight of the child / indicative age

Less than 10 kg

(group 0)

Less than 13 kg

(group 0+)

(group 0)

up to approx.

6 months

From 9 to 18 kg (group 1)

From approx. 1 to 3 years

up to approx. 1 year

Type of ISOFIX child seat

ISOFIX size category

Cot

rearward facing

forward facing

F

G

C

D

E

C

D

A

B

B1

Row 1 with 2-seat bench seat

or individual seat

Not ISOFIX

Right outer

seat

X

IL-SU

X

IUF, IL-SU

Row 2 with

2-seat bench Centre seat

seat in row 1

IL-SU

Left outer seat

IL-SU

186

Safety

Weight of the child / indicative age

Less than 10 kg

(group 0)

up to approx.

6 months

(group 0)

Less than 13 kg

(group 0+)

From 9 to 18 kg (group 1)

From 1 to 3 years approx.

up to approx. 1 year

Type of ISOFIX child seat

ISOFIX size category

Cot

rearward facing

forward facing

F

X

G

C

D

E

C

D

A

B

B1

Right outer

seat

5

IL-SU

X

IUF, IL-SU

Row 2 with

individual

Centre seat

IL-SU

X

seats in row 1

Left outer seat

X

Row 3

187

Safety

IUF Seat suitable for the installation of an Isofix

Universal seat, Forward facing secured

using the upper strap.

IL-SU Seat suitable for the installation of an

Isofix Semi-Universal seat either:

For more information on the ISOFIX

mountings and in particular the

upper strap, refer to the corresponding

section.

-

rearward facing fitted with an upper

strap or a support leg,

forward facing fitted with a support

leg,

an cot fitted with an upper strap or a

support leg.

Remove and stow the head restraint

before fitting a child seat with a

backrest to a passenger seat.

Refit the head restraint when the child

seat is removed.

X

Seat not suitable for the installation of a

child seat of the weight group indicated.

188

Safety

Recommendations

Child seats

The incorrect installation of a child seat in a

vehicle compromises the child's protection in

the event of an accident.

Check that there is no seat belt or seat belt

buckle under the child seat as this could

destabilise it.

Remember to fasten the seat belts or the

child seat harnesses keeping the slack in

relation to the child's body to a minimum,

even for short journeys.

For the installation of a child seat using a

seat belt, ensure that this is well tensioned

on the child seat and that it is holding the

child seat firmly against the seat of your

vehicle. If your front passenger seat is

adjustable, move it forward if necessary.

At the rear seats, always leave sufficient

space between the front seat and:

Installing a booster

cushion

For optimum installation of the forward facing

child seat, ensure that the back of the child

seat is as close as possible to the backrest

of the vehicle's seat, or in contact if possible.

The head restraint must be removed before

installing a child seat with a backrest on the

passenger seat.

ensure that the head restraint is stowed or

attached securely so that it is not thrown

around the vehicle in the event of sharp

braking.

The chest part of the seat belt must be

positioned on the child's shoulder without

touching the neck.

ensure that the lap part of the seat belt

passes correctly over the child's thighs.

PeugeoT recommends the use of a booster

seat which has a back, fitted with a seat belt

guide at shoulder level.

5

Refit the head restraint as soon as the child

seat is removed.

As a safety precaution, do not leave:

-

one or more children alone and

unsupervised in a vehicle,

a child or an animal in a vehicle which

is exposed to the sun, with the windows

closed,

-

Children at the front

The legislation on carrying a child on the

front passenger seat is specific to each

country. Refer to the legislation in force in

the country in which you are driving.

Deactivate the passenger front airbag when

a rearward facing child seat is installed on

the front passenger seat. otherwise, the

child would risk being seriously injured or

killed if the airbag were deployed.

-

the keys within reach of children inside

the vehicle.

-

a rearward facing child seat,

the feet of a child seated in a forward

facing child seat.

To prevent accidental opening of the doors,

use the child lock.

Take care not to open the rear windows by

more than one third.

To protect young children from the rays of

the sun, fit side blinds on the rear windows.

For this, move the front seat forward and if

necessary straighten its backrest.

189

Safety -> Locations for child seats (Seat belt/ISOFIX) for Your Peugeot Traveller Van First Generation (2016-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals