
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Starting, driving and stopping the vehicle
236
Starting, driving and stop-
ping the vehicle
General Safety Instructions
WARNING
Reduced driving noise
with electric vehicles
Even when E-Sound is switched on in accordance
with legal requirements, an electric vehicle produces
very little driving noise, which means that other road
users might not even hear it. There is therefore a risk
of accidents, particularly in areas with traffic calm-
ing, while manoeuvring or parking.
e Be particularly attentive while driving!
Operating principle
A distinction is made between readiness for opera-
tion (standby) and readiness to drive. Both are acti-
vated separately.
Readiness for operation
When you get into the vehicle, the key you have with
you is detected by the vehicle and readiness for op-
eration is established automatically. Some electrical
equipment and electronic systems, such as the cen-
tral display, are available.
e To save the battery, only leave the vehicle in
standby (ready for operation) and only use the
active electrical equipment for as long as is ab-
solutely necessary.
Readiness to drive
The vehicle is ready to drive when drive position D, N
or R is engaged. The vehicle is now ready to drive
and can be moved.
Drive positions
Fig. 194: Drive position display
The following drive positions are available:
D — Drive
Drive position D for driving forwards.
R — Reverse gear
Drive position R for driving in reverse.
Only engage while the vehicle is stationary and the
brake is applied.
N — Neutral
Drive position N must be engaged while the vehicle
is being transported or in car washes, for example.
P — Park
Drive position P for securing the vehicle.
Drive positions D, R and N are selected using the
selector lever to the right of the steering wheel,
while drive position P is selected by pressing the P
button.
Starting and driving the vehicle
Establishing readiness for operation
bb High-voltage battery is sufficiently charged.
bb Disconnect the vehicle plug from the vehicle
charge port.
bb Driver's key in passenger compartment.
Automatically
e Get in and shut the driver's door. Driver's key is
detected in the passenger compartment.
Ready for operation.
Manually
Fig. 195: Power button
bb Readiness for operation switched off.
e Press the Power button. Driver's key is detected
in the passenger compartment.
Ready for operation.