2019-2024 Porsche Taycan 2 Door Starting, driving and stopping the vehicle -> Energy recovery (recuperation) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting, driving and stopping the vehicle -> Energy recovery (recuperation) for Your Porsche Taycan 2 Door First Generation (2019-2024)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Starting, driving and stopping the vehicle
237
Establishing readiness for operation and driv-
ing off
bb Ready for operation.
bb Vehicle plug removed from the charge port,
charge port door closed and charging cable
safely stowed.
1. Press the brake pedal.
2. Select transmission range D or R with the selec-
tor lever.
The parking lock and the electric parking brake
are deactivated automatically.
3. To drive off, release the brake pedal and slowly
press the accelerator pedal.
The range depends on, among other things, the
driving style, the climatic conditions, the use of en-
ergy-intensive loads and the selected vehicle set-
tings, e.g. driving mode.
Information
The readiness for operation is switched off in the
following situations:
– with corresponding settings in the energy man-
agement system
– if the vehicle was locked from outside
– by opening the driver's door and the driver's seat
belt in drive positions D or R
– by pressing the P button
– by other systems that, for example, automatically
activate drive position P or request the activation
of P if there is an error
Driving off at high acceleration (Launch
Control)
WARNING
Driving off at high
acceleration
When driving off at high acceleration, you may lose
control of the vehicle or endanger other road users
under certain circumstances (poor road conditions,
lack of attention, etc.).
e Only drive off at high acceleration on public roads
if the road and traffic conditions permit.
e Do not endanger other road users when driving
off at high acceleration.
The vehicle already permits you to drive off at an
extremely high rate of acceleration in normal driving
mode. Maximum acceleration from a standstill is
achieved using Launch Control, however.
Driving off with Launch Control
bb Vehicle is at a standstill.
bb Readiness for operation established.
bb Steering wheel is not turned.
bb Drive position D selected.
bb Driving mode SPORT or SPORT PLUS activated.
1. Press the brake pedal with your left foot.
2. Quickly press down the accelerator fully and hold
it down.
A message appears on the instrument cluster.
3. Release the brake pedal within a short space of
time.
Vehicle accelerates to the maximum.
Information
Stress on components increases dramatically when
starting with maximum acceleration in comparison
with normal driving off.
Energy recovery (recuperation)
WARNING
Unsuitable use of
recuperation
Recuperation is a system that is used only for energy
recovery. It is not a driver assistance system and
cannot take over any driver assistance system tasks.
e Do not use the deceleration effect of recupera-
tion as a distance control system.
e Always be ready to brake and stay a safe dis-
tance away from the vehicle in front.
e For greater braking power or for braking the ve-
hicle to a standstill, press the brake pedal as
required.
WARNING
Automatic overrun recu-
peration limited or not
available
The maximum overrun recuperation is limited.
The detection capability of the sensors can be im-
paired by soiling, bad weather conditions (rain, snow,
ice, fog, spray) and unfavourable road conditions
(stone chippings, reflective objects). Vehicles up
ahead may not be adequately detected, or may not
be detected at all.
If automatic overrun recuperation (Auto setting) is
not available, e.g. if sensors are dirty, a message to
this effect will appear in the instrument cluster.
e Do not use automatic overrun recuperation in
conditions of poor visibility and bad road
conditions.
Operating principle
During recuperation, the drive converts most of the
kinetic energy into electrical energy, which is stored
in the high-voltage battery. A distinction is made
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Starting, driving and stopping the vehicle
238
between overrun recuperation and braking
recuperation:
– Overrun recuperation starts as soon as you take
your foot off the accelerator pedal and slows
down the vehicle. You can configure the overrun
recuperation strength.
– When you press the brake, braking recuperation
increases the amount of recuperated energy to a
maximum. A higher braking request is then
achieved using the vehicle's wheel brakes.
Overrun recuperation settings
The following overrun recuperation settings can be
selected:
Set-
ting
Dis-
play
Meaning
Off No dis-
play
No overrun recuperation.
Vehicle coasting.
On
Overrun recuperation with
moderate deceleration of
the vehicle.
Auto
Variable adaptation of over-
run recuperation based on
data relating to the area
around the vehicle.
Information
The deceleration effect of overrun recuperation can
be limited if the charge state of the high-voltage
battery is high, for example.
e Compensate for reduced overrun recuperation by
pressing the brake if necessary.
The overrun recuperation strength is displayed in
the power meter.
Selecting overrun recuperation level
e Press the recuperation button on the steering
wheel:
– Quick press = Switch overrun recuperation on
and off
– Press and hold = Switch automatic overrun
recuperation (Auto) on and off
– or –
e Drive e Recuperation (accelerator pedal)
The selected setting is shown on the instrument
cluster.
Information
Automatic overrun recuperation is only available
when PSM is active. Automatic overrun recuperation
is not available in "PSM SPORT" mode.
Information
The various overrun recuperation settings are as-
signed to the driving modes, but can also be freely
selected by the driver.
Personalisation is possible in the INDIVIDUAL driving
mode.
Driving in coasting mode
"Coasting" is the term used to describe driving
without the braking effect of overrun recuperation.
This function is designed to increase efficiency by
reducing power consumption and increasing the
range. Coasting occurs after the accelerator pedal is
fully released slowly. Coasting ends when the accel-
erator pedal is pressed.
bb Driving in transmission range D.
bb PSM is active.
bb No severe uphill or downhill gradients.
bb Recuperation is switched off.
e Slowly remove your foot from the accelerator
pedal.
Information
Coasting mode is also possible in "SPORT" and
"SPORT PLUS" driving modes. The overrun recuper-
ation setting that is activated as standard for these
driving modes must be switched off when selecting
these modes.
Stop, park and exit the vehicle
WARNING
Inactive power steering
and brake booster
The power steering and brake booster are only ef-
fective when the vehicle is ready for operation. If the
vehicle is not ready for operation, much greater force
is required to turn the steering wheel or brake.
e Only turn the vehicle off when it is stationary.

Related Topics

Popular Owner Manuals