2005-2013 Renault Clio 4 Door Driving -> Cruise control User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Cruise control for Your Renault Clio 4 Door Third Generation (2005-2013)

CRUISE CONTROL - SPEED LIMITER: cruise control function  
2
3
4
5
This function is an addi-  
tional driving aid. However,  
the function does not take  
the place of the driver.  
1
Therefore, it can under no circum-  
stances replace the driver’s respon-  
sibility to respect speed limits and to  
be vigilant (the driver must always  
be ready to brake).  
The cruise control function helps you to  
maintain your driving speed at a speed  
that you choose, called the cruising  
speed.  
Controls  
1 Main “On/Off” switch.  
2 Cruising speed activation, storage  
and increase switch (+).  
This cruising speed may be set at any  
speed above 20 mph (30 km/h).  
Cruise control must not be used in  
heavy traffic, on undulating or slip-  
pery roads (black ice, aquaplaning,  
gravel) and during bad weather (fog,  
rain, side winds etc.).  
3 Cruising speed activation, storage  
and decrease switch (-).  
4 Switch the function to standby (with  
cruising speed memorised (O)).  
There is a risk of accidents.  
5 Cruising speed storage and recall  
switch (R).  
The cruise control function  
is in no way linked to the  
braking system.  
2.31  
CRUISE CONTROL - SPEED LIMITER: cruise control function (continued)  
Driving  
Once a cruising speed is stored and  
the cruise control function is active,  
you may lift your foot off the accelera-  
tor pedal.  
2
3
Important: you are never-  
theless advised to keep  
your feet close to the pedals  
in order to react if neces-  
sary.  
1
Switching on  
Activating cruise control  
Press switch 1 on the side showing  
At a steady speed (above 20 mph  
(30 km/h)approximately)pressswitch 2  
(+) or 3 (-): the function is activated and  
the speed is stored.  
Ï
.
The indicator light on the instrument  
panel lights up to indicate that the cruise  
control function is in operation.  
When the function is activated, the  
message ‘Cruise control’ appears on  
the instrument panel accompanied by  
dashes.  
The system is designed in such a  
way that it is possible to detect a dif-  
ference between the stored speed  
and the speed shown on the instru-  
ment panel.  
2.32  
CRUISE CONTROL - SPEED LIMITER: cruise control function (continued)  
Exceeding the cruising speed  
In the event of an emergency  
The cruising speed may be exceeded  
at any time by depressing the accelera-  
tor pedal. Whilst the speed is being ex-  
ceeded, the cruising speed displayed  
2
3
on the instrument panel flashes.  
Cruising speed cannot be main-  
tained  
In some driving conditions (for exam-  
ple when driving down a steep gradi-  
ent), the system is unable to maintain  
the cruising speed: the speed on the in-  
strument panel information display will  
flash to inform you of this situation.  
Varying the cruising speed  
The cruising speed may be changed  
by pressing repeatedly or continuously  
on:  
– switch 2 (+) to increase the speed;  
– switch 3 (-) to decrease the speed.  
The cruise control function  
is in no way linked to the  
braking system.  
2.33  
CRUISE CONTROL - SPEED LIMITER: cruise control function (continued)  
Recalling the cruising speed  
If a speed has been stored, it is possi-  
ble to recall it by pressing switch 5 (R),  
on condition that you are driving faster  
than 20 mph (30 km/h) and that you  
are sure that the driving conditions are  
suitable (traffic, road surface condition,  
2
3
4
5
weather conditions, etc.).  
1
Putting the function on  
standby  
The function is interrupted when you:  
Switching off the function  
Press switch 1. If you do this, the speed  
is not memorised.  
Confirmation that the function has been  
switched off is given when the indicator  
light on the instrument panel goes out.  
– switch 4 (O);  
– the brake pedal;  
– the clutch pedal or shift into neutral  
if the vehicle has an automatic gear-  
box.  
In all three cases, the cruising speed is  
stored.  
Putting the cruise control  
on standby or switching it  
off does not cause a rapid  
reduction in speed: you  
must brake by depressing the brake  
pedal.  
Pressing switches 2 (+) or 3 (-) re-  
activates the cruise control func-  
tion without taking into account the  
memorised speed: it is the speed at  
which the vehicle is moving that is  
taken into account.  
2.34  

Related Topics

Popular Owner Manuals