Get Driving -> Speed limiter Guide for Renault Clio 4 Door Third Generation (2005-2013)

CRUISE CONTROL - SPEED LIMITER: limiter function

2

3

4

5

1

6

The speed limiter function helps you

stay within the driving speed limit that

you choose.

Controls

1 Main “On/Off” switch.

Indicator light 6

This indicator light on the in-

strument panel lights up to indicate that

the limiter function is in operation.

Î

2 Limit speed activation, storage and

This may be useful, for example, when

driving in urban areas or in areas with

speed restrictions (roadworks, etc.).

increase switch (+).

When the function is activated, the mes-

sage ‘Limiter’ appears on the instru-

ment panel accompanied by dashes.

3 Limit speed activation, storage and

decrease switch (-).

The system operates above a driv-

ing speed of approximately 20 mph

(30 km/h).

4 Switch the function to standby (with

limit speed memorised (O)).

5 Stored limit speed activation, stor-

age and recall (R).

2.28

CRUISE CONTROL - SPEED LIMITER: limiter function (continued)

Driving

When a limit speed has been stored,

if this speed is not reached the vehicle

behaves in a similar way to those with-

out the speed limiter function.

From this point, no effort on the accel-

erator pedal will allow you to exceed

the programmed speed except in an

emergency (refer to information on

“Exceeding the limit speed”).

2

3

1

Switching on

Varying the limit speed

Press switch 1 on the side showing

The limit speed may be changed by

pressing repeatedly or holding down:

Ð. This indicator light on the instru-

– switch 2 (+) to increase the speed;

– switch 3 (-) to decrease the speed.

ment panel comes on.

Limiting the speed

At a steady speed (above 20 mph

(30 km/h)), press switch 2 (+): the

speed is stored.

The system is designed in such a

way that it is possible to detect a dif-

ference between the stored speed

and the speed shown on the instru-

ment panel.

The speed limiter function is

in no way linked to the brak-

ing system.

2.29

CRUISE CONTROL - SPEED LIMITER: limiter function (continued)

Exceeding the limit speed

Recalling the limit speed

In the event of an emergency

A stored speed can be recalled by

pressing switch 5 (R) until the message

“Speed limiter” is displayed.

It is possible to exceed the limit speed

at any moment. To do this: press the

accelerator pedal firmly and fully

(beyond the kickdown point).

2

1

3

4

5

Whilst the speed is being exceeded,

the cruising speed displayed on the in-

strument panel flashes.

When the emergency has passed, re-

lease the accelerator pedal: the speed

limiter function will return as soon as

you reach a speed lower than the limit

speed before the emergency.

Switching off the function

Limit speed cannot be maintained

The speed limiter function is interrupted

when you press:

In some driving conditions (for example

when driving up or down a steep gradi-

ent), the system is unable to maintain

the limit speed: the stored speed on the

instrument panel information display

will flash to inform you of this situation.

– switch 4 (O), in which case the limit

speed remains stored and the mes-

sage “Stored” appears on the instru-

ment panel;

– switch 1, in which case the limit

speed is no longer stored, and the in-

dicator light on the instrument panel

goes out to confirm that the function

has been cancelled.

2.30

Driving -> Speed limiter for Your Renault Clio 4 Door Third Generation (2005-2013)

Related Topics

Popular Owner Manuals

Latest Owner Manuals