IGNITION SWITCH: vehicle with key
Special note on vehicles with an au-
tomatic gearbox
Ignition on position M
The ignition is switched on:
Before starting, move the lever to posi-
tion N or P.
Start position D
Special note on vehicles with a
Quickshift gearbox
If the engine fails to start at the first
attempt, the key must be turned back
before the starter can be activated
again. Release the key as soon as the
engine starts.
Depress the brake pedal with the lever
in the N position.
Note:
Note: on diesel versions, several sec-
onds may pass between turning the
key and the engine starting to allow for
engine preheating.
If a gear other than neutral is displayed,
it flashes; starting is not possible unless
you depress the brake pedal, while
holding the key in the starting position.
Position S: Off and steering
lock applied
To lock: remove the key and turn the
steering wheel until the steering column
locks.
To unlock: turn the key and the steering
wheel slightly.
Accessories position A
When the ignition is switched off, any
accessories (radio, etc.) will continue to
function.
2.3
English 
