2005-2013 Renault Clio 4 Door Getting to know your vehicle -> Exterior lighting and signals User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Getting to know your vehicle -> Exterior lighting and signals for Your Renault Clio 4 Door Third Generation (2005-2013)

EXTERIOR LIGHTING AND SIGNALS  
2
1
3
1
Side lights  
u
Adjusting the brightness of  
the instrument panel lighting  
Turn control 3 downwards to reduce the  
Turn the end of stalk 1 until the  
symbol is opposite mark 2.  
brightness and upwards to increase it.  
An indicator light on the instrument  
panel will come on.  
Before driving at night,  
check that the electrical  
equipment is operating cor-  
rectly and adjust the head-  
light beams (if your vehicle is not  
carrying its normal load). In gen-  
eral, check that the lights are not  
obscured (by dirt, mud, snow or ob-  
jects which could cover them).  
1.79  
EXTERIOR LIGHTING AND SIGNALS (continued)  
Automatic operation (depending on  
vehicle)  
See-me-home lighting  
function  
With the engine running, the dipped  
beam headlights are switched on or off  
automatically depending on the level of  
ambient light, without the need to oper-  
ate stalk 1 (position 0).  
This function (useful, for example, for  
opening a gate, a garage, etc.) enables  
you to switch on dipped headlights mo-  
mentarily.  
2
1
With the ignition off and the headlights  
off, pull stalk 1 towards you: the dipped  
beam headlights come on for approxi-  
mately thirty seconds.  
This function can be deactivated or re-  
activated.  
To activate it, with the ignition on,  
press button 4 for at least four sec-  
onds. An instrument panel message  
confirms this action.  
4
This action may be carried out no more  
than four times for a maximum lighting  
period of two minutes.  
To deactivate it, with the ignition  
on and the vehicle stopped, press  
button 4 for at least four seconds.  
The ‘Auto lights OFF’ message is  
displayed on the instrument panel.  
To switch off the lights before they  
go out automatically, turn the end of  
stalk 1, then return it to position 0.  
Dipped beam  
headlights  
k
Manual operation  
If stalk 1 is operated, it overrides and  
cancels the automatic function tempo-  
rarily.  
Turn the end of stalk 1 until the symbol  
is opposite mark 2.  
An indicator light on the instrument  
panel will come on.  
1.80  
EXTERIOR LIGHTING AND SIGNALS (continued)  
Cornering lights  
Automatic lighting with main  
beam headlights  
Depending on the vehicle, when you  
change to main beam headlights, the  
dipped beam headlight raise to improve  
lighting.  
Depending on the vehicle, if the dipped  
beam headlights are on when corner-  
ing, and under certain driving condi-  
1
tions (speed, steering wheel angle, for-  
wards gear selected, etc.), additional  
lights are switched on to light the inside  
of the bend.  
Note: in the event of an operating fault  
on this system, when returning from  
main beam to dipped beam headlights,  
the dipped beam headlight concerned  
goes out and the front fog lights come  
Note: under certain conditions of pro-  
longed use, this system will be switched  
off automatically as it is intended for use  
over limited periods.  
on, accompanied by the  
light and a fault message on the instru-  
ment panel  
g
warning  
Main beam headlights  
With the dipped beam head-  
lights lit, pull stalk 1 towards you.  
Warning: as this operating mode is not  
a normal driving condition, consult your  
RENAULT Dealer as soon as possible.  
á
When the main beam headlights are lit  
up, an indicator light on the instrument  
panel comes on.  
To return to the dipped headlight posi-  
tion, pull stalk 1 towards you again.  
1.81  
EXTERIOR LIGHTING AND SIGNALS (continued)  
Automatic operation (depending on  
vehicle)  
Lights-on reminder buzzer  
If the lights are switched on after the  
engine is switched off, a warning beep  
sounds when the driver’s door is opened  
to warn you that the lights are still on.  
The lights go out when the engine  
is stopped, when the driver’s door is  
opened or when the vehicle is locked.  
1
Switching off the lights  
Manual operation  
There are three options (depending on  
the vehicle):  
– return stalk 1 to its initial position;  
– the lights go out when the engine  
is stopped, when the driver’s door  
is opened or when the vehicle is  
locked. In this case, the next time  
the engine is started the lights will be  
switched back according to the posi-  
tion of the stalk 1.  
– a timer will switch off the lights auto-  
matically.  
1.82  
EXTERIOR LIGHTING AND SIGNALS (continued)  
Rear fog light  
Turn centre ring 5 on stalk 1  
until the symbol faces mark 6, then re-  
Switching off the lights  
Turn ring 5 again until mark 6 is oppo-  
site the symbol for the fog light you wish  
to switch off.  
f
lease it.  
5
1
The fog light can only be switched on if  
the dipped beam headlights or front fog  
lights are lit.  
The front and rear fog lights switch off  
when the exterior lights are switched  
off.  
To avoid inconveniencing other road  
users, remember to switch off the rear  
fog light when it is no longer needed.  
Note: the fog light is located on the  
driver’s side.  
6
Front fog lights  
Turn centre ring 5 on stalk 1  
until the symbol faces mark 6, then re-  
g
lease it.  
Operation of the fog lights depends on  
the exterior lighting selected, and an in-  
dicator light will light up on the instru-  
ment panel.  
When driving in the fog, the dipped  
beam headlights do not come on  
automatically, you must switch them  
on manually.  
Erratic illumination of the dipped  
beam headlight and front fog light  
indicator lights coupled with a mes-  
sage on the instrument panel indi-  
cates an operating fault with the au-  
tomatic lighting of the main beam  
headlights.  
Do not forget to switch off the fog lights  
when they are no longer needed, to  
avoid inconveniencing other road  
users.  
Switching on the fog lights remains  
the responsibility of the driver: the  
indicator lights on the instrument  
panel inform you whether the fog  
lights are lit (indicator light on) or not  
(indicator light not on).  
Refer to the information on  
“Automatic lighting with main beam  
headlights” in Section 1.  
1.83  

Related Topics

Popular Owner Manuals