CHANGING A WHEEL (2/2)
Undo the bolts and take off the wheel.
Vehicle fitted with a tyre pressure
loss warning system
Fit the emergency spare wheel on the
central hub and turn it to locate the
In the event of under-inflation (punc-
mounting holes in the wheel and the
tures, under-inflation etc.), the
hub.
warning light appears on the instrument
Tighten the bolts, checking that the
panel. ➥ 2.38.
wheel is correctly positioned on its hub.
Lower the jack.
With the wheel on the ground, tighten
the bolts fully and have the tightness of
the bolts checked and the emergency
Do not leave the tools un-
spare wheel pressure checked as soon
secured inside the vehicle
as possible.
as they may come loose
under braking. After use,
check that all the tools are correctly
clipped into the tool kit, then posi-
tion it correctly in its housing: risk of
injury.
If bolts are supplied with the emer-
gency spare wheel, you must use
these bolts only for the emergency
spare wheel.
The jack is designed for wheel
changing purposes only. Under no
If you have a puncture, re-
circumstances should it be used for
place the wheel as soon as
carrying out repairs underneath the
possible.
vehicle or to gain access to the un-
A tyre which has been punc-
derside of the vehicle.
tured should always be inspected
(and repaired, where possible) by a
specialist.
5.10
English 
