TRIP COMPUTER: general information (4/4)
Selections
Interpreting some of the
values displayed after
resetting
(the display depends on the vehicle
equipment and country)
a) Trip log, operating faults and infor-
mation message readout;
The values showing average fuel con-
sumption, range and average speed
will become more stable and reliable
the further you travel after pressing the
reset button.
b) Journey settings:
– average fuel consumption;
– current fuel consumption;
– estimated range with remaining fuel;
– distance travelled;
For the first few miles after pressing the
reset key you will notice that the range
increases as you travel. This range
takes into account the average fuel con-
sumption since the last time the reset
button was pressed. However, average
consumption can decrease when:
– average speed;
4
– LPG average fuel consumption;
Resetting the trip mileage
recorder and journey
parameters (reset button)
With one of the trip parameters se-
lected as the display, press and hold
the 4 switch “OK” until the display
resets to zero.
– estimated range with remaining LPG
fuel;
– the vehicle stops accelerating;
– the engine reaches its operating
temperature (if the engine was cold
when the reset key was pressed);
– LPG range;
c) trip mileage recorder and average
speed;
– when driving from an urban area
onto the open road.
d) Reset the tyre pressure;
e) set the time;
f) distance before service;
– distance before service;
– mileage before oil change.
Automatic resetting of the
journey parameters
Resetting occurs automatically when
the maximum value of any of the pa-
rameters is exceeded.
g) Estimated range with remaining rea-
gent.
1.80
English 
