Fuses (1/2)
1
a
B
CORRECT INCORRECT
Fuse box
tweezers 1
If any electrical component does not
work, check the condition of the fuses.
Remove the fuse using tweezers 3, lo-
cated at the back of cover A or B.
Unclip cover A or B (depending on ve-
hicle).
To remove the fuse from the tweezers,
slide the fuse to the side.
Check the fuse in question
and replace it, if neces-
sary, by a fuse of the same
rating.
It is not advisable to use the free fuse
locations.
If a fuse is fitted where the rating is
too high, it may cause the electrical
circuit to overheat (risk of fire) in the
event of an item of equipment using
an excessive amount of current.
In accordance with local legislation
or as a precautionary measure:
Obtain an emergency kit containing
a set of spare bulbs and fuses from
an approved Dealer.
5.23
English 
