heaDlIghts: changing bulbs (1/2)
6
B
2
3
4
5
B
c
D
e
1
a
After opening the bonnet, pull tool A
upwards. Remove the two screws 1
from the headlight using the tool.
Do not touch the bulb glass. hold it
by its base.
When the bulb has been changed,
make sure you refit the cover correctly.
Daytime running light
Remove the cover C, unlock the bulb
holder 2 by rotating it.
Bulb type: P21w.
Pull the headlight forwards, sliding it in
its rails up to the end stop.
Discharge bulb dipped beam
headlight
Bulb type: D1s.
Dipped beam headlight D
After refitting the light, tighten the
screws 1 and reposition the tool cor-
rectly in its housing.
halogen dipped beam headlight
Unlock the two springs D, remove
the cover, then unclip the spring 3 to
remove the bulb 4.
Direction indicator lights
Rotate the bulb holder B to unlock it.
Bulb type: Py21w.
Bulb type: h7.
Due to the danger involved
in handling high-voltage de-
vices, this type of bulb must
be replaced by an approved
dealer.
It is essential to use anti U.V. 55W
bulbs so as not to damage the plastic
on the headlights.
5.12
English 
