wInDscreen wIPer BlaDes
1
Check the condition of the wiper
blades. You are responsible for their
service life:
– clean the blades, windscreen and
rear screen regularly with soapy
water;
B
4
a
2
c
– do not use them when the wind-
screen or rear screen are dry;
– free them from the windscreen or
rear screen when they have not
been used for a long time.
5
6
3
replacing windscreen wiper
blades 1
with the ignition on and engine
switched off, lower the windscreen
wiper stalk completely: they stop
slightly away from the bonnet.
rear screen wiper blade 4
– Lift wiper arm 6;
– In frosty weather, make
sure that the wiper blades
are not stuck by ice (to
avoid the risk of the motor
overheating).
– pivot blade 4 until some resistance is
met (movement C);
– depending on the vehicle, press
tab 5, then remove the blade by pull-
ing it (movement B).
– Check the condition of the wiper
blades.
Lift wiper arm 3, pull tab 2 (move-
ment A) and push the blade upwards.
Replace the wiper blades as soon
as they begin to lose efficiency
(approximately once a year).
to refit
to refit
Slide the blade along the arm until it
clips on. Make sure that the blade is
correctly locked in position. Return the
windscreen wiper stalk to the park po-
sition.
To refit the wiper blade, proceed in re-
verse order to removal. Make sure that
the blade is correctly locked in position.
Whilst changing the blade, take care
not to drop the arm onto the window
after it has been removed as this
may break the window.
5.30
English 
