CLOCK AND EXTERIOR TEMPERATURE
Vehicle without button 2 (vehicles
Exterior temperature indicator
Special note:
When the external temperature is
between –3°C and +3°C, the °C
figures flash (indicates risk of ice
formation).
equipped with a navigation system,
audio equipment, etc.)
1
Refer to the equipment instructions
for the special features of these
vehicles.
2
When the ignition is switched on,
the clock and (depending on
vehicle) external temperature are
displayed.
Setting the time on the clock 1
Vehicle with button 2
Exterior
temperature
If the electrical supply is cut
(battery disconnected, feed wire
broken, etc.), the clock will not
display the correct time.
indicator
- press and hold button
2
for
As black ice formation is
related to exposure,
humidity and temperature, the
exterior temperature alone is not
sufficient to detect black ice.
approximately three seconds,
- when the hour flashes, press
button 2 again to adjust it,
The clock must be reset.
- wait approximately three seconds,
the minutes will flash, press
button 2 to adjust them,
- wait approximately three seconds,
the minutes stop flashing, the time
is set.
We recommend that you do not
make these settings while
driving.
1.67
English 
