FATIGUE DETECTION WARNING (2/2)
– repeatedly press the control 4 up or
Note:
down until you reach the “Fatigue de-
tection warn.” menu, then press the
switch 3 OK.
– if the warning is not deleted by press-
ing switch 3 OK, the beep repeats;
– the function may interpret certain
driving styles as a sign of tiredness
(sporty driving, incorrect driving, etc.)
or driving along a road which is in
poor condition.
– press the 3 OK switch again to acti-
vate or deactivate the function.
3
4
Operation
The function is set to notify the
driver if:
– the vehicle speed is greater than ap-
proximately 37.2 mph (60 km/h);
and
– Approximately 15 minutes have
passed since the deletion of the pre-
vious warning.
Operating faults
If the system detects a fault, the mes-
sage “Check fatigue warning” is dis-
played on the instrument panel. Consult
an approved dealer.
Vehicles not fitted with a navigation
system
The function triggers an alert if the
system detects repeated signs of fa-
tigue in the driver at the steering wheel.
– With the vehicle at a standstill, press
and hold the switch 3 OK to access
the settings menu;
When a risk of fatigue is detected,
the message “Fatigue warning have a
break” is displayed on the instrument
panel accompanied by a beep.
– repeatedly press the control 4 up or
down until you reach the “Driving as-
sistance” menu. Press the switch 3
OK;
Press switch 3 OK to delete the warn-
ing.
It is advisable to stop as soon as pos-
sible for a break.
2.59
English 
