FUSES (1/2)
Use the fuse allocation label in storage
compartment A to identify the fuses.
Certain fuses should only be replaced
by a qualified professional. These fuses
are not listed on the label.
Only change the fuses represented on
the label.
2
A
1
Fuse box
Tweezers 2
If any electrical component does not
work, check the condition of the fuses.
Remove the fuse using tweezers 2, lo-
cated underneath the fuses.
Open flap A. Press the bottom of clip 1
and pull simultaneously on flap A to
remove it and access the fuses.
To remove the fuse from the tweezers,
slide the fuse to the side.
Check the fuse in question
and replace it, if neces-
sary, by a fuse of the same
rating.
It is not advisable to use the free fuse
locations.
If a fuse is fitted where the rating is
too high, it may cause the electrical
circuit to overheat (risk of fire) in the
event of an item of equipment using
an excessive amount of current.
In accordance with local legislation
or as a precautionary measure:
obtain an emergency kit containing
a set of spare bulbs and fuses from
an approved Dealer.
5.28
English 
