FRONT HEADLIGHTS: replacing the bulbs (2/2)
Halogen front fog lights 6
Additional lights
– Access the bulb holder via the un-
derneath of the vehicle;
If you wish to fit fog lights to your ve-
hicle, please see an authorised dealer.
4
– unclip the flap;
– depending on the vehicle, discon-
nect the connector;
– turn the bulb holder a quarter turn.
Please note when work-
ing close to the engine that
it may be hot. In addition,
Bulb type: H11 H16or depending on
the vehicle.
5
the engine cooling fan may
6
start at any moment. The
warning light in the engine compart-
ment reminds you of this.
LED dipped beam/main beam
Risk of injury.
headlights 5
Please see an authorised dealer.
Daytime running lights and
side lights 4
Please see an authorised dealer.
Any operation on (or modi-
fication to) the electrical
system must be performed
To comply with local legislation, or
as a precaution, you can obtain an
emergency kit containing a set of
spare bulbs and fuses from an ap-
proved dealer.
by an approved dealer
since an incorrect connection might
damage the electrical equipment
(harness, components and in partic-
ular the alternator). In addition, your
Dealer has all the parts required for
fitting these units.
LED front fog lights 6
Please see an authorised dealer.
The bulbs are under pres-
sure and can break when
replaced.
Risk of injury.
5.19
English 
