Fuses and bulbs
Front fog light bulb*
Turn signal bulb
1.
Raise the bonnet.
1
2. Move the loop››› Fig. 110
in the direc-
tion of the arrow and remove the cover.
3
3. Turn the bulb holder››› Fig. 111
anti-
clockwise and pull.
4. Remove the bulb by pressing on the bulb
holder and turning it anticlockwise at the
same time.
Fig. 113 Fog light: detach the bulb holder
5. Installation involves all of the above
steps in reverse sequence.
Follow the steps indicated:
1
1.
Remove the screw››› Fig. 112
from
the fog light grille using a screwdriver
and extract the grille.
2
2. Remove the 3 screws››› Fig. 112
.
3. Remove the metal clip situated on the
upper part of the fog light by pulling
3
away from the vehicle
the fog light.
and extract
1
4. Remove connector››› Fig. 113
from
anti-
Fig. 112 Fog light: remove the grille
the bulb.
2
5. Turn the bulb holder››› Fig. 113
clockwise and pull.
6. Remove the bulb by pressing on the bulb
holder and turning it anticlockwise at the
same time.
7. Installation involves all of the above
steps in reverse sequence.
»
8. Check that the bulb works properly.
99
English 
