The essentials
●
Unfold the vehicle key blade
Emergency locking of doors with-
out door cylinder
Rear lid
›››
page 130.
●
Insert the key shaft into the lower opening in
the cover on the driver door handle››› Fig. 6
(arrow) then remove the cover upwards.
●
Insert the key blade into the lock cylinder to
unlock or lock the vehicle.
Special characteristics
●
The anti-theft alarm will remain active
when vehicles are unlocked. However, the
alarm will not be triggered›››
page 129.
Fig. 8 Rear lid: handle
●
After the driver door is opened, you have 15
Fig. 7 Locking the door manually.
seconds to switch on the ignition. Once this
time has elapsed, the alarm is triggered.
If the central locking system should fail to
work at any time, doors with no lock cylinder
will have to be locked separately.
●
Switch the ignition on. The electronic immo-
bilizer recognises a valid vehicle key and de-
activates the anti-theft alarm system.
A mechanical locking device (only visible
when the door is open) is provided on the
front passenger door.
Note
The anti-theft alarm is not activated when
the vehicle is locked manually using the
●
Pull the cap out of the opening.
key shaft›››
page 129.
●
Insert the key in the inside slot and turn it to
Fig. 9 Rear lid: button to close rear lid.
the right as far as it will go (if the door is on
the right side) or to the left (if the door is on
the left side).
The rear lid opening system operates electri-
cally*. It is activated by exerting slight pres-
sure on the handle››› Fig. 8.
To lock/unlock, press the button or button
››› Fig. 4 on the remote control key.
Once the door has been closed it can no lon-
ger be opened from the outside. Pull the inte-
rior door handle once to unlock and open the
door.
A warning appears on the instrument panel
display if the rear lid is open or not properly
»
17
English 
