The essentials
Securing child seats
Fig. 38 On rear seats: possible assemblies of chil-
dren seats.
●
A
Figure››› Fig. 38
shows the basic child re-
In the passenger seat with height regula-
perfect position, adjust the passenger back-
rest as far forward as possible1).
straint system mounting using lower retaining
tion: the passenger seat must be in its rear-
rings and the upper retaining strap. Figure
most and highest position1).
If a semi-universal type chair is to be instal-
led, in which the method of attachment to the
car is through the seat belt and support
bracket, it should never be installed in the
central rear seat as the ground clearance is
lower than in other places and the support
bracket will not allow the seat to remain suffi-
ciently stable.
B
››› Fig. 38
shows the child restraint system
To correctly use a child seat in the back, the
front backrest must be adjusted so that there
is no contact with the child seat in the back in
the case that it goes opposite to the direction
of the car. In the case of front facing restraint
systems, the front backrest must be adjusted
so that there is no contact with the child's
feet.
mounting using the vehicle seat belt.
The seat belt may be used to secure univer-
sal type child seats to the vehicle seats
marked with a U in the table below.
●
In the passenger seat without height regu-
lation: the passenger seat must be in its rear-
most position1).
The systems include the child restraint
system mounting with an upper retaining
»
To adjust the passenger seat to accommo-
date a child's seat and get the seat belt in a
1)
Compliance with current national legislation
and the manufacturer's instructions is required
when using or installing child seats.
27
English 
