Driving
125
•
when rocking the vehicle backwards and forwards to free it from mud, for
Ignition lock
example.
You should press the button to switch the ESP back on when you no longer
need wheel spin.
Position of the ignition key
The TCS and EDL are also switched off if the ESP is switched off. That is to say,
these systems are not available while ESP is not activated.
When does the
It lights up when the ignition is switched on and should go out again after
about 2 seconds.
It will start flashing to indicate that ESP is counteracting an unstable
driving condition.
button light up or flash?
•
•
•
•
It will light up continuously if there is a malfunction in the ESP.
It will light up continuously if the ESP is switched off.
Fig. 94 Ignition key posi-
tions
WARNING
•
The electronic stabilisation program (ESP) cannot defy the laws of
physics. This should be kept in mind, particularly on slippery and wet
roads and when towing a trailer.
0
Ignition switched off, steering lock A
In the position ⇒ fig. 94 the ignition and the engine are OFF and the steering
may be locked.
•
Always adapt your driving style to suit the condition of the roads and
the traffic situation. Do not let the extra safety afforded by ESP tempt you
into taking any risks when driving, this can cause accidents.
For the Steering lock without the ignition key, turn the steering wheel until it
locks with an audible sound. You should always lock the steering wheel when
• Please refer to the corresponding warning notes on ESP in ⇒ page 139,
“Intelligent technology”.
you leave your vehicle. This will help prevent theft of the vehicle ⇒
.
1
Switching on the ignition or glow plug system A
Turn the ignition key to this position and let go of the key. If the key cannot be
0
12
turned or is difficult to turn from position A to position A, move the
steering wheel (to take the load off the steering lock mechanism) until the key
turns freely.
Safety First
Operating instructions
Tips and Maintenance
Technical Data
English 
