Driving
129
–
Slide the gearlever to the left, and then into the reverse position
shown on the gear lever.
Caution
If the engine has been driven hard for a long period, the engine could over-
heat when it is switched off. Risk of engine damage. For this reason, you
should idle the engine for approx. 2 minutes before you switch it off.
Certain versions of the model may include a 6-speed manual gearbox, the
diagram is shown on the gearstick.
The reverse gear can only be engaged when the vehicle is stationary. When
the engine is running, before engaging this gear wait about 6 seconds with
the clutch pressed in fully in order to protect the gearbox.
Manual gearbox
The reversing lights come on when the reverse gear is selected and the igni-
tion is on.
Driving a car with a manual gearbox
WARNING
•
When the engine is running, the vehicle will start to move as soon as a
gear is engaged and the clutch released.
Never select the reverse gear when the vehicle is in motion. Risk of acci-
dent.
•
Note
Do not rest your hand on the gear lever when driving. The pressure of your
hand could cause premature wear on the selector forks in the gearbox.
When changing gear, you should always depress the clutch fully to avoid
unnecessary wear and damage.
Do not hold the car “on the clutch” on hills. This causes premature wear
•
•
Fig. 95 Central Console:
diagram of 5-speed
manual gearbox
•
and damage to the clutch.
Selecting the reverse gear
–
The vehicle should be stationary with the engine idling. Press the
clutch right down.
–
Place the gear lever into neutral gate and push the lever all the
way down.
Safety First
Operating instructions
Tips and Maintenance
Technical Data
English 
