Lights and visibility
1)
●
●
●
●
If necessary, correct the right-hand rear-
Select the R position on the control.
mirrors to estimate the distance to vehicles
behind you when changing lane, you could
misjudge the distance. Risk of accident!
view mirror: rotate the control to position R1).
●
Select reverse gear.
In the Easy Connect system the exterior
Adjust the front passenger exterior mirror so
that you can see, for example, the kerb area
well.
mirrors can be adjusted using the /
button and the Vehicle > SETTINGSfunc-
tion button.
CAUTION
●
●
Release the reverse gear.
If one of the mirror housings is knocked
out of position (e.g. when parking), the mir-
rors must first be fully retracted with the
electric control. Do not readjust the mirror
housing by hand, as this will interfere with
the mirror adjuster function.
●
The adjusted position for the rear view mir-
Tilt function for front passenger exterior
mirror*
ror is stored.
When parking backwards, and in order to be
able to see the kerb, the passenger side mir-
ror can be automatically tilted towards the
passenger to provide a better view of the
kerb. The control must be in the position R1)
for this feature to be operational.
Fold the rearview mirrors when locking the
vehicle*
●
Before washing the vehicle in an auto-
The Easy Connect system, the / but-
ton and the function buttons Vehicles >
SETTINGS > Mirrors and windscreen
wiperscan be used to have the exterior mir-
rors fold in when the vehicle is parked and
matic car wash, please make sure to re-
tract the exterior mirrors to prevent them
from being damaged. Electrically retracta-
ble exterior mirrors must not be folded in or
out by hand. Always use the electrical
power control.
The mirror returns to its original position as
soon as you drive forward at over 15 km/h
(9 mph) or switch off the ignition. It also re-
turns to its original position if the position of
the control is adjusted.
locked
››› page 35.
When the vehicle is locked with the remote
control, the exterior mirrors are retracted au-
tomatically. When the vehicle is opened with
the remote control, the exterior mirrors are
deployed automatically.
Note
If the electrical adjustment should fail to
operate, both of the mirrors can be adjus-
ted by hand by lightly pressing the edge of
the mirror glass.
Storing the rear view mirror settings for the
tilt function
●
Switch the ignition on.
WARNING
●
Access the Easy Connect system, button
Convex or wide-angle* exterior mirrors
give a larger field of vision. However, they
make objects look smaller and further
away than they really are. If you use these
/ and the Vehicle > SETTINGS >
Rear view mirrors and windscreen
wipersbutton and select lower while re-
versing
››› page 35.
1)
Regulation in right-hand drive vehicles is sym-
metrical.
155
English 
