Get Operation -> Using the instrument panel Guide for Seat Leon 4 Door Third Generation (2012-2020)

Operation

Inspection of compressed natural gas

tanks (CNG) reminder

Vehicles with digital instrument panel

screen wiper lever, or OK on the multifunc-

●

The date of the service can only be read

tion steering wheel.

through the Service menu page 108.

›››

When less than 90 days for the review of the

compressed natural gas tanks (CNG), when

the ignition is switched on, the instrument

panel display will a reminder for review of

the gas tanks and an audible warning will be

emitted.

●

In vehicles with the LongLife system in

which the battery has been disconnected

for a long period of time, it is not possible to

calculate the date of the next service.

Therefore the service interval display may

not be correct. In this case, bear in mind the

maximum service intervals permitted

Resetting service interval display

If the service was not carried out by a SEAT

dealership, the display can be reset as fol-

lows:

As approaches the service date of inspection

of the gas tanks, the message and the audi-

ble warning will stop modify accordingly.

page 342.

›››

●

Vehicles with analogue instrument panel

If you reset the display manually, the next

service interval will be indicated as in vehi-

cles with fixed service intervals. For this

reason we recommend that the service in-

terval display be reset by a SEAT author-

ised Dealer.

●

Switch off the ignition, press and hold but-

ton 0.0/SET .

●

Check a service warning

Switch ignition back on.

●

Release the button 0.0/SET and press it

With the ignition switched on, the engine off

and the vehicle at a standstill, the current

service notification can be read:

again for the next 20 seconds.

●

If the period of 48 months for an inspec-

Vehicles with digital instrument panel

tion at a specialised workshop of com-

pressed natural gas tanks (CNG) is excee-

ded, the vehicle may not working in this

mode.

Check the date of the current service on the

infotainment system

●

The service interval display can only be re-

set through the Service menu page 108.

›››

●

Press the infotainment  /  button.

Do not restart the indicator between the

service intervals, otherwise the information

displayed will be incorrect.

●

Press the Vehicle > SETTINGS

^››› ^{page 35 button.}

●

Select the Service menu option to display

Using the instrument panel

If the oil change service is reset manually, the

service interval display changes to a fixed

service interval, also in vehicles with Flexible

oil change service.

information about the services.

Introduction

Vehicles with analogue instrument panel

●

Press and hold the button 0.0/SET for more

With the ignition switched on, it is possible to

read the different functions of the display by

scrolling through the menus.

than 5 seconds to consult the service mes-

sage.

Note

●

The service message disappears after a

few seconds, when the engine is started or

when OK/RESET is pressed on the wind-

120

Instruments and warning/control lamps

●

In vehicles with multifunction steering wheel,

the multifunction display can only be

To open the menu or the informative display

Operation with the windscreen wip-

er lever

shown, press button

until the menu or the informative display

opens automatically.

or wait a few seconds

operated with the steering wheel buttons.

Some menu options can only be read when

the vehicle is at a standstill.

Changing menu settings

●

In the menu displayed, press the upper or

WARNING

Distracting the driver in any way can lead

to an accident and cause injuries.

lower part of the rocker switch

quired menu option is checked. The option

appears framed.

until the re-

●

Never use the menus on the instrument

panel display while the vehicle is in motion.

●

Press button

to make the required modi-

fications. A mark indicates that the system or

function is activated.

Note

Fig. 136 Windscreen wipers lever: control but-

tons.

After loading or changing the 12-volt bat-

tery, check the system settings. If the pow-

er supply is interrupted, the system settings

might be incorrect or deleted.

Back to menu selection

Select Backon the corresponding menu to

exit.

As long as a priority 1 page 102 warning is

›››

active, it will not be possible to access any

menu. Some warnings can be confirmed and

Note

hidden with the button Fig. 136

›››

If when switching on the ignition warnings

are shown about existing faults, it might not

be possible to change the settings or show

the information as described. In this case,

go to a specialised workshop and request a

repair.

Select a menu or an informative display

●

Switch the ignition on.

●

If a message or vehicle symbol is displayed,

press button ; if necessary, several times.

●

To display the menus page 108 or to re-

›››

turn to the selection of menus from a menu or

from an informative display, hold down the

rocker button

●

To change from one menu to another, press

the upper or lower part of the rocker switch.

121

Operation

wait a few seconds until the menu or the in-

formative display opens automatically.

Using the multifunction steering

wheel

Key for the driving assistance sys-

tems*

Changing menu settings

●

In the menu displayed, turn the right thumb-

wheel of the multifunction steering wheel

Fig. 137 until the desired option of the

›››

menu is highlighted. The option appears

framed.

●

Press the button 

Fig. 137 to make the

›››

required modifications. A mark indicates that

the system or function is activated.

Fig. 137 Right side of multifunction steering

wheel: buttons to the menus and informative in-

dications on the instrument panel.

Back to menu selection

Press the button  or 

Fig. 137.

›››

Note

As long as a priority 1 page 110 warning is

›››

active, it will not be possible to access any

menu. Some warnings can be confirmed and

hidden with the button  of the multifunction

If when switching on the ignition warnings

are shown about existing faults, it might not

be possible to change the settings or show

the information as described. In this case,

go to a specialised workshop and request a

repair.

Fig. 138 On the turn light and main beam lev-

er: key for driver assistance systems (depend-

ing on the version).

steering wheel Fig. 137.

›››

Select a menu or an informative display

With the turn signal and main beam headlight

lever button, you can activate or deactivate

the driver assistance systems displayed in the

Assistance systemsmenu.

●

Switch the ignition on.

●

If a message or vehicle symbol is displayed,

press the button 

several times.

Fig. 137; if necessary,

›››

Activate or deactivate a driver assistance

system

●

To change menus, use buttons  

or  

●

Fig. 137.

›››

●

Press Fig. 138

briefly to open

›››

To open the menu or the information dis-

Fig. 137 or

the Driving aidsmenu.

played, press the button 

›››

122

Operation -> Using the instrument panel for Your Seat Leon 4 Door Third Generation (2012-2020)

Related Topics

Popular Owner Manuals

Latest Owner Manuals