Get Wheels Guide for Skoda Kamiq SUV First Generation (2018-2026)

Wheels › Tyres and rims 161

92 Load index

Speed symbol

Wheels

H

Tyres and rims

Load index

The load index indicates the maximum permissible

load for each individual tyre.

What you should be mindful of

NOTICE

88 560 kg

89 580 kg

90 600 kg

91 615 kg

92 630 kg

93 650 kg

94 670 kg

95 690 kg

Protect tyres from contact with lubricants and

fuel.

Always store wheels or tyres in a cool, dry and,

where possible, dark place. Tyres without rims

should be stored in an upright position.

▶

Alloy rims can be damaged by grit.

▶

Do not use light alloy rims with a high-sheen sur-

face in wintry weather conditions or with snow

chains

Speed symbol

The speed symbol indicates the maximum permissi-

ble speed for a vehicle ﬁtted with tyres in the cate-

gory concerned.

Causes of uneven tyre wear

Improper tyre pressure.

▶

Driving style (e.g. fast cornering, rapid acceleration

and deceleration).

Wheel alignment errors.

Incorrect wheel balancing.

S

T

U

H

V

W

Y

180 km/h

190 km/h

200 km/h

210 km/h

240 km/h

270 km/h

300 km/h

▶

Wheel changes

For uniform wear on all

tyres, we recommend

that you change the

wheels every 10,000 km

according to the sched-

ule.

WARNING

Do not exceed the maximum permissible load and

speed for the mounted tires.

▶

Tread wear indicators

Wear indicators are loca-

ted in the proﬁle of the

tyres that display the

permissible minimum

tread depth.

Advice for tyre assembly

With directional tires, the correct direction of rota-

tion must be observed. The direction of rotation of

the tyres is marked by arrows on the wall of the

tyre.

›

Markings on the walls of

the tyres with the letters

TWI or other symbols

(e.g. ) indicate the po-

sition of the wear indica-

tors.

Always replace the tyres by the axle.

›

Additional information

Only ﬁt radial tyres of the same type, size (rolling cir-

cumference) and the same tread pattern on one axle.

Approved tyre sizes are speciﬁed in the technical ve-

hicle documentation and in the declaration of con-

formity (in the so-called COC Document).

A tyre is to be regarded as worn out when this wear

indicator is ﬂush with the tread.

The tread depth can be measured with a tread

depth gauge on the ice scraper. The ice scraper is lo-

cated on the inside of the fuel ﬁller ﬂap.

The declaration of conformity can be obtained from

a ŠKODA Partner (valid for some countries and some

models).

WARNING

Risk of accident!

Overview of tyre labelling

Do not use worn tires.

▶

Tyre manufacturing date

The date of manufacture is indicated on the tyre

sidewall.

Explanation of tyre markings

e.g. 205/60 R 16 92 H

205 Tyre width in mm

60 Height/width ratio in %

For example, DOT ... 10 20 means that the tyres

were produced in the 10th week of the year 2020.

R

Code letter for the type of tyre - Radial

16 Diameter of wheel in inches

162 Wheels › All-season or winter tires

WARNING

Risk of an accident!

Settings

The speed limit setting for tyres is set in the Infotain-

ment in the following menu item:

Do not use tyres that are older than 6 years.

▶

Troubleshooting

Or:

Help with a ﬂat tyre

Spare and emergency spare wheel » page 162

▶

Changing the wheel and raising the vehi-

cle » page 163

Breakdown kit » page 164

▶

Snow chains

Usage

▶

Change of tyre pressure

The snow chains improve driving in wintry road con-

ditions.

illuminates

Stop the vehicle.

›

WARNING

Risk of accident as well as tyre damage!

Check the tyres and tyre pressures.

›

Do not use chains on routes that are free from

snow and ice.

▶

Show tyres with modiﬁed pressure

In the following menu, select the menu item for

›

displaying the tyre condition:

What you should be mindful of

Or:

Before ﬁtting the snow chains, remove the full

›

wheel trims.

Only mount the snow chains on the front wheels.

›

All-season or winter tires

Usage

Technical data

Permitted rim/tyre combinations for mounting of

snow chains:

All-season or winter tyres improve handling in winter

weather conditions. They are characterised by ‘M+S’

and a mountaintop and snowﬂake symbol

.

Rim size

Tyre size

6Jx16 ET35

195/60 R16

What you should be mindful of

Only ﬁt snow chains with links and locks that are no

larger than 13 mm.

For the best possible handling, use tyres on all four

wheels with a minimum tread depth of 4 mm.

Change winter tyres to summer tyres at the appro-

priate time. Summer tyres have better driving and

braking characteristics on snow- and ice-free roads

and at temperatures above 7 °C.

Spare and emergency spare wheel

Overview

Spare wheel

The dimensions of a standard spare wheel corre-

spond to the dimensions of the wheels mounted

on the vehicle.

A temporary spare wheel is provided with a warn-

ing label on the rim. This wheel is intended to ena-

ble you to reach the nearest specialist garage.

▶

Usage conditions

If all-season or winter tyres are installed that have a

lower speed category than the actual speciﬁed maxi-

mum vehicle speed, then proceed as follows:

▶

In Infotainment, set the speed limit according to

the category of tyres ﬁtted.

In the driver's ﬁeld of view, aﬃx a warning label

with the maximum value of the speed category in-

tended for the tyres ﬁtted (applies only to certain

countries).

›

Inﬂate a space saver wheel with the maximum pre-

scribed pressure.

›

Emergency wheel

A warning label is displayed on the rim of the tempo-

rary spare wheel. This wheel is intended to enable

you to reach the nearest specialist garage.

Wheels › Changing the wheel and raising the vehicle 163

An emergency wheel is signiﬁcantly narrower than

the wheels mounted ex-factory.

Inserting

Insert the wheel into the wheel well with the out-

›

side facing downwards.

Insert the bass loudspeaker.

Screw in the locknut until it stops.

Insert the connector in the bass loudspeaker.

Place the box with the tool kit and secure it with

›

Remove the wheel on vehicles without sound

system and replace

›

The spare wheel or emergency wheel is mounted in a

recess under the ﬂoor covering or the variable load-

ing ﬂoor in the boot.

the tape.

Removing

Changing the wheel and raising the

vehicle

Loosen the retaining

belt and take out the

box with the tool kit.

›

What you should be mindful of

Unscrew the lock nut.

Take out the wheel.

›

Before changing

Park the vehicle securely and secure it from rolling

›

away.

Turn oﬀ the engine.

Let all of the occupants get out. During the wheel

change they should not stand on the road, e.g. be-

hind the crash barriers.

›

Inserting

Close all doors, the boot and bonnet.

Uncouple any trailers.

›

Insert the wheel into the wheel well with the out-

›

side facing downwards.

Pull the ﬁxing band through the opposite holes in

the wheel rim.

Screw in the locknut until it stops.

Replace the box with the tool kit into the wheel

›

Raise vehicle

WARNING

›

Always ensure the base plate of the lifting jack can-

not slip!

and secure it with the tape.

Provide a wide and ﬁrm base under the jack on

▶

loose surfaces.

Create a non-slip base (e.g. a rubber ﬂoor mat) un-

der the jack on a smooth surface.

Always raise the vehicle with the doors closed.

Do not insert any body parts under the raised vehi-

cle.

▶

Remove the wheel on vehicles with sound

system and replace

▶

Removing

Loosen the retaining

belt and take out the

box with the tool kit.

›

Do not start the engine of the lifted vehicle.

▶

NOTICE

Danger of damage to vehicle!

Make sure that the jack is attached correctly to the

bridge of the sill.

Press the safety button

and remove the plug.

›

▶

After having been changed

Check the tyre pressure on the mounted wheel

and adjust if necessary.

›

In vehicles with a tyre indicator, save the tyre pres-

sure values in the system.

Have the tightening torque of the wheel bolts of

the mounted tyres checked with a torque wrench

as soon as possible.

›

Unscrew the lock nut.

Remove the bass loud-

speaker.

Take out the wheel.

›

The speciﬁed tightening torque is 120 Nm.

Drive carefully until the tightening torque is checked.

Replace the damaged tyre. It is not recommended to

repair the tyre.

164 Wheels › Breakdown kit

Position the jack and lift the vehicle

WARNING

Use the jack from the tool kit.

Risk of an accident!

Too low a tightening torque may cause the wheel

to disengage while driving.

▶

Too high a tightening torque can damage the

threads and cause the rim to deform.

▶

WARNING

Risk of an accident!

Do not grease or lubricate screws.

▶

Do not use corroded or damaged screws.

▶

Changing the wheel and raising the vehicle

Release screws

Position the jack at the jacking point closest to the

wheel to be replaced.

Support the base plate of the jack with its full area

resting on level ground and ensure that the jack is

located in a vertical position at the jacking point.

Use the crank to raise the jack until its claw enclo-

ses the bar.

Continue to lift the vehicle until the wheel is just

oﬀ the ﬂoor.

›

If the vehicle has covers over the wheel bolts or

wheel trims, remove them.

›

WARNING

›

If you step on the key end when loosening the

screw, hold on to the vehicle for better stability.

▶

›

Some vehicles may have

anti-theft wheel bolts

that protect the wheels

from theft.

Changing a wheel

Unscrew the screws and place them on a clean

surface.

Remove the wheel carefully.

Attach the wheel.

Slightly screw in the screws.

Lower the vehicle.

›

Insert the upper sec-

›

tion on the anti-theft

wheel bolt until it

stops.

›

NOTICE

Place the key on the

wheel bolt or on the

attachment piece.

›

Applies to wheel trims supplied ex-factory or from

ŠKODA Original Accessories: the anti-theft wheel

bolt should be installed in the position marked on

the back of the wheel trim.

▶

Turn the screw a maxi-

›

mum of half a turn so

that the wheel does

not come loose and fall

oﬀ.

Tighten screws

Tighten the opposite wheel bolts including the an-

ti-theft wheel bolt one after the other.

Reinstall the cover caps of the wheel bolts or the

›

full wheel covers.

Keep the label with the code number of the anti-

theft wheel bolts. A replacement upper section can

be acquired from ŠKODA original parts based on

this.

Jacking points for the jack

The jacking points are located on the lower sill of the

vehicle.

Breakdown kit

Content overview

The kit is located in a box under the ﬂoor covering in

the luggage compartment.

A

B

15.5 cm

25.8 cm

Wheels › Breakdown kit 165

Once a tyre pressure of 2.0–2.5 bar is achieved, con-

tinue the journey at a maximum speed of 80 km/h

(50 mph).

Avoid full accelerations, strong braking and fast

cornering.

›

Information for driving with repaired tyres

The pressure of the repaired tyre must be checked

after driving for 10 minutes.

›

If the tyre pressure is 1.3 bar and less, do not con-

tinue! Seek the help of a specialist garage.

›

A

B

C

D

Sticker with speed indication

Valve remover

If the tyre pressure is higher than 1.3 bar, correct

the pressure to the correct value of at least 2 bar

and continue driving.

›

Inﬂation hose with plug

Air compressor (the layout of the controls may

be diﬀerent depending on the type of air com-

pressor)

NOTICE

Danger of damage to the compressor!

After the maximum running time of the air com-

pressor, allow it to cool for a few minutes.

▶

E

F

G

H

I

Tyre inﬂation hose

WARNING

Risk of burns!

The tyre inﬂation hose and the air compressor may

become hot when inﬂated.

Allow the air compressor and hose to cool for a

few minutes.

Button for pressure reduction

Pressure indicator

12 volt cable connector

ON and OFF switch

▶

J

Tyre inﬂation bottle

K

Replacement valve core

Usage restrictions

The declaration of conformity is included with the air

compressor or the log folder.

Do not use the kit in the following cases:

The rim is damaged.

▶

The outdoor temperature is below the minimum

temperature indicated in the manual of the tyre ﬁll-

ing bottle.

Usage conditions

Performing a repair with the breakdown kit not at all

intended to replace a permanent repair on the tyre.

Tyre punctures are greater than 4 mm.

There is damage to the tyre wall.

The expiry date stated on the tyre inﬂation bottle

▶

The purpose of the repair is to get you to the nearest

specialist garage.

has expired.

Change the tyre repaired by the breakdown kit as

soon as possible.

Self-help

Before using the kit

Park the vehicle securely and secure it from rolling

away.

Turn oﬀ the engine.

Let all of the occupants get out. During the wheel

repair they should not stand on the road, e.g. be-

hind the crash barriers.

Close all doors as well as the bonnet and boot lid.

›

Seal the tyres

Unscrew the valve cap from the damaged tyre.

Unscrew the valve core with the valve insert and

place it on a clean surface.

›

Shake the tyre inﬂation bottle back and forth with

sealant.

›

Screw the inﬂation hose onto the tyre inﬂater bot-

tle. The ﬁlm on the closure is pierced automatically.

›

Uncouple any trailers.

Remove the plug from the inﬂation hose and push

it fully onto the tyre valve.

Hold the bottle with the bottom facing upwards

and ﬁll all of the sealing agent into the tyre.

›

After using the kit

If a tyre pressure of 2.0 bar cannot be achieved, the

tyre is too damaged and cannot be sealed with the

puncture set.

›

Remove the ﬁller plug from the valve.

Screw in the valve insert.

›

Stop driving. Seek the help of a specialist garage.

›

166 Wheels › Tyre pressure

Inﬂate tyres

This information only serves as information for

the prescribed tyre pressure. This is not a listing

of approved tyre sizes for your vehicle. These

are in the vehicle's technical documentation, as

well as in the declaration of conformity (in the

so-called COC document).

Fit the tyre inﬂation hose of the air compressor to

the tyre valve.

›

Secure the vehicle with the parking brake.

Start the engine.

Plug the connector into the 12 volt socket .

Turn on the air compressor.

Once a tyre pressure of 2.0-2.5 bar is reached, turn

oﬀ the air compressor.

›

Tyre pressure reading for the front axle tyres

E

F

›

Tyre pressure reading for the rear axle tyres

›

Prescribed tyre pressure value for the emergen-

cy wheel

G

Observe the maximum running time of the air com-

pressor according to the directions of the repair kit

manufacturer.

Tyre pressure monitor

Functionality

If an air pressure of 2.0 - 2.5 bar has not been

reached, remove the tyre inﬂation hose from the

valve.

›

The tyre pressure monitoring indicator indicates a

change in tyre pressure.

Drive approx. 10 metres forwards or backwards to

allow the sealing agent to distribute in the tyre.

›

Replace the tire inﬂation hose on the valve and re-

peat the inﬂation procedure.

›

Warning when pressure changes

illuminates

Stop the vehicle.

Check the tyres and tyre pressures.

›

Tyre pressure

What you should be mindful of

Show tyres with modiﬁed pressure

In the following menu, select the menu item for

displaying the tyre condition:

›

NOTICE

Always adjust the tyre pressure to the load.

Check the pressure in all tyres at least once a

month and before each longer ride.

▶

Or:

Check the pressure when the tyres are cold. Do

not reduce the higher pressure of warm tyres.

After each change in tyre pressure, save the new

values in the tyre control display.

▶

Function restriction

WARNING

Risk of an accident!

If tyre pressure loss is very quick, try to stop the

vehicle carefully without heavy steering or heavy

braking.

The system is unable to provide a warning in the

event of a very rapid tyre pressure loss, e.g. sudden

puncture.

▶

The system function may be restricted in the follow-

ing cases:

Uneven loading of the wheels, e.g. with a trailer at-

tached

▶

Sticker with prescribed tyre pressures

Sporty driving style

Driving on dirt roads

Snow chains ﬁtted

▶

The sticker with prescribed tyre pressures is located

on the inside of the fuel ﬁller ﬂap.

Inﬂation pressure for

half load

A

Inﬂation pressure for

environmentally

friendly operation

(slightly lower fuel

consumption and

emissions)

Inﬂation pressure for

a full load

Tyre diameter in in-

Saving tyre pressure values

B

Store the tyre pressure values in the infotainment

Inﬂate the tyres to the prescribed inﬂation pres-

sure.

›

Turn on the ignition.

In the following menu, select the menu item for

displaying the vehicle condition:

›

C

D

ches

Or:

Wheels › Wheel bolt cover caps 167

Installing

Press the wheel trim onto the wheel rim at the

designated valve opening.

›

▶

Using the functional surfaces

control display menu.

Tap on the functional surface

select the tyre

.

›

When using an anti-theft wheel bolt, it must be lo-

cated at the location indicated on the bezel.

Press the trim, starting at the valve, into the rim on

both sides until it engages around the entire cir-

cumference.

›

Then follow the instructions on the screen.

Save the tyre pressures in the following cases:

Change of tyre pressure

Change of one or more wheels

Change of position of a wheel on the vehicle

Always after covering a distance of 10,000 km or

once a year

▶

NOTICE

Use hand pressure, do not hit the wheel cover.

Troubleshooting

Tyre pressure display faulty

ﬂashes for about 1 minute and stays on

Stop the vehicle, switch oﬀ the ignition and

start the engine.

›

If the symbol ﬂashes again after starting the en-

gine, there is a system fault.

Continue driving, exercising appropriate caution,

and seek the help of a specialist garage.

›

Wheel bolt cover caps

Remove cover caps and install

Disconnecting

Push the pull-oﬀ clamp

onto the cover cap up

to the stop.

›

Remove the cover cap.

›

Installing

Push the cover cap onto the wheel bolt to the stop.

›

Full wheel frame

Removing and installing the trim

Applies to factory built or original accessory trims

from ŠKODA.

Disconnecting

Hang the clamps for removing the wheel trims at

the edge of one of the openings in the trim.

›

Push the wheel wrench through the clamp, support

on the tyre and pull oﬀ the wheel trim.

›

Wheels for Your Skoda Kamiq SUV First Generation (2018-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals