2018-2026 Skoda Kamiq SUV Wheels -> Spare and emergency spare wheel User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Wheels -> Spare and emergency spare wheel for Your Skoda Kamiq SUV First Generation (2018-2026)

162 Wheels All-season or winter tires  
WARNING  
Risk of an accident!  
Settings  
The speed limit setting for tyres is set in the Infotain-  
ment in the following menu item:  
Do not use tyres that are older than 6 years.  
Troubleshooting  
Or:  
Help with a flat tyre  
Spare and emergency spare wheel » page 162  
Changing the wheel and raising the vehi-  
cle » page 163  
Breakdown kit » page 164  
Snow chains  
Usage  
Change of tyre pressure  
The snow chains improve driving in wintry road con-  
ditions.  
illuminates  
Stop the vehicle.  
WARNING  
Risk of accident as well as tyre damage!  
Check the tyres and tyre pressures.  
Do not use chains on routes that are free from  
snow and ice.  
Show tyres with modified pressure  
In the following menu, select the menu item for  
displaying the tyre condition:  
What you should be mindful of  
Or:  
Before fitting the snow chains, remove the full  
wheel trims.  
Only mount the snow chains on the front wheels.  
All-season or winter tires  
Usage  
Technical data  
Permitted rim/tyre combinations for mounting of  
snow chains:  
All-season or winter tyres improve handling in winter  
weather conditions. They are characterised by ‘M+S’  
and a mountaintop and snowflake symbol  
.
Rim size  
Tyre size  
6Jx16 ET35  
195/60 R16  
What you should be mindful of  
Only fit snow chains with links and locks that are no  
larger than 13 mm.  
For the best possible handling, use tyres on all four  
wheels with a minimum tread depth of 4 mm.  
Change winter tyres to summer tyres at the appro-  
priate time. Summer tyres have better driving and  
braking characteristics on snow- and ice-free roads  
and at temperatures above 7 °C.  
Spare and emergency spare wheel  
Overview  
Spare wheel  
The dimensions of a standard spare wheel corre-  
spond to the dimensions of the wheels mounted  
on the vehicle.  
A temporary spare wheel is provided with a warn-  
ing label on the rim. This wheel is intended to ena-  
ble you to reach the nearest specialist garage.  
Usage conditions  
If all-season or winter tyres are installed that have a  
lower speed category than the actual specified maxi-  
mum vehicle speed, then proceed as follows:  
In Infotainment, set the speed limit according to  
the category of tyres fitted.  
In the driver's field of view, affix a warning label  
with the maximum value of the speed category in-  
tended for the tyres fitted (applies only to certain  
countries).  
Inflate a space saver wheel with the maximum pre-  
scribed pressure.  
Emergency wheel  
A warning label is displayed on the rim of the tempo-  
rary spare wheel. This wheel is intended to enable  
you to reach the nearest specialist garage.  
Wheels › Changing the wheel and raising the vehicle 163  
An emergency wheel is significantly narrower than  
the wheels mounted ex-factory.  
Inserting  
Insert the wheel into the wheel well with the out-  
side facing downwards.  
Insert the bass loudspeaker.  
Screw in the locknut until it stops.  
Insert the connector in the bass loudspeaker.  
Place the box with the tool kit and secure it with  
Remove the wheel on vehicles without sound  
system and replace  
The spare wheel or emergency wheel is mounted in a  
recess under the floor covering or the variable load-  
ing floor in the boot.  
the tape.  
Removing  
Changing the wheel and raising the  
vehicle  
Loosen the retaining  
belt and take out the  
box with the tool kit.  
What you should be mindful of  
Unscrew the lock nut.  
Take out the wheel.  
Before changing  
Park the vehicle securely and secure it from rolling  
away.  
Turn off the engine.  
Let all of the occupants get out. During the wheel  
change they should not stand on the road, e.g. be-  
hind the crash barriers.  
Inserting  
Close all doors, the boot and bonnet.  
Uncouple any trailers.  
Insert the wheel into the wheel well with the out-  
side facing downwards.  
Pull the fixing band through the opposite holes in  
the wheel rim.  
Screw in the locknut until it stops.  
Replace the box with the tool kit into the wheel  
Raise vehicle  
WARNING  
Always ensure the base plate of the lifting jack can-  
not slip!  
and secure it with the tape.  
Provide a wide and firm base under the jack on  
loose surfaces.  
Create a non-slip base (e.g. a rubber floor mat) un-  
der the jack on a smooth surface.  
Always raise the vehicle with the doors closed.  
Do not insert any body parts under the raised vehi-  
cle.  
Remove the wheel on vehicles with sound  
system and replace  
Removing  
Loosen the retaining  
belt and take out the  
box with the tool kit.  
Do not start the engine of the lifted vehicle.  
NOTICE  
Danger of damage to vehicle!  
Make sure that the jack is attached correctly to the  
bridge of the sill.  
Press the safety button  
and remove the plug.  
After having been changed  
Check the tyre pressure on the mounted wheel  
and adjust if necessary.  
In vehicles with a tyre indicator, save the tyre pres-  
sure values in the system.  
Have the tightening torque of the wheel bolts of  
the mounted tyres checked with a torque wrench  
as soon as possible.  
Unscrew the lock nut.  
Remove the bass loud-  
speaker.  
Take out the wheel.  
The specified tightening torque is 120 Nm.  
Drive carefully until the tightening torque is checked.  
Replace the damaged tyre. It is not recommended to  
repair the tyre.  

Related Topics

Popular Owner Manuals