Get Lighting, windscreen wipers and washers Guide for Skoda Superb SUV Fourth Generation (2024-2026)

48 Lighting, windscreen wipers and washers › Exterior lighting

illuminates

Switch on the light.

Lighting, windscreen wipers and

washers

›

Exterior lighting

Functionality

Operation

Switching oﬀ the

lights except the

daytime running

lights

Unless otherwise stated, the light works when the

ignition is switched on.

Daylight running lights

Switching the low

beam on/oﬀ auto-

matically

Switching on the

parking lights

Switching on the low

beam

The daytime running lights illuminate the area in

front of the vehicle.

In vehicles for certain markets, this also provides

lighting for the rear area of the vehicle.

Operating conditions

✓

The lights switch is in position

,

or

.

Switching the low beam on/oﬀ automatically

The low beam is automatically switched on or oﬀ de-

pending on the lighting conditions.

As the basic position of the light switch, use posi-

tion

.

High beam and headlight ﬂasher

The high beam works when the low beam is on.

Operating conditions

✓

The light switch is in the

The automatic headlight circuit is indicated by the il-

lumination of the symbol in the light switch.

position.

Switch on high beam

A

B

Switch oﬀ main

beam / switch on

headlight ﬂasher

Switching low beam on automatically in rain

Operating conditions

✓

The light switch is in the

position.

When the main beam or

headlight ﬂasher is

✓ The function is activated.

switched on, the indica-

✓ The windscreen wipers are switched on for lon-

tor lamp lights up in the instrument cluster

.

ger than 30 seconds.

CAUTION

Risk of an accident!

Do not dazzle other road users with the high beam.

The automatic headlight circuit is indicated by the il-

lumination of the symbol

in the light switch.

▶

Full LED Headlights

Turn signal

When the light switch is in position

, the head-

lights provide the best possible beam of light in front

of the vehicle. The Dynamic cornering light function

ensures the best possible illumination of the curve

area.

Switching on the

turn signal light on

the right - the warn-

ing light ﬂashes in

the instrument clus-

ter

Switching on the

turn signal light on

the left - the warn-

ing light ﬂashes in

the instrument clus-

A

B

CORNER function

The CORNER function is intended for turning or ma-

noeuvring (e.g. when parking).

The function illuminates the vicinity of the vehicle

front in the direction of travel.

Operating conditions

✓ The turn signal is switched on or the front wheels

are steered sharply.

ter

Turn signal - convenience signalling

Convenience signalling enables three ﬂashes of the

turn signal lights without having to move the lever

up or down.

✓ The low beam is switched on.

✓ The fog lights are not switched on.

✓ The driving speed is lower than 40 km/h.

When no light is switched on

Tap the control lever up or down.

›

The symbol

in the light switch may also light up in

The corresponding turn signal lights ﬂash three

times.

the instrument cluster, indicating that it is necessary

to switch on the light.

Lighting, windscreen wipers and washers › Exterior lighting 49

Tap the lever in the opposite direction ahead of

Double-sided parking light

time to stop signalling.

The two-sided parking light allows the parked vehi-

cle to be illuminated through activation of the side-

lights.

Fog light

Positions for pulling out

the light switch

Turn on the ignition.

›

Turn the light switch to position

Switch oﬀ the ignition.

Lock the vehicle.

.

›

Fog lights - when

switched on, the in-

dicator light in the

instrument cluster il-

luminates

1

When the parking light is switched on, an acoustic

warning signal sounds after the ignition is switched

oﬀ and the driver's door is opened. After a few sec-

onds or after the driver's door is closed, the warning

signal will stop.

Rear fog light - when

switched on, the in-

dicator light in the

2

The light may switch oﬀ automatically if the 12-volt

vehicle battery is too low. If the parking lights on

both sides are switched on with the ignition oﬀ, the

lights will not be switched oﬀ automatically and the

12 volt vehicle battery may be discharged.

instrument cluster illuminates

Turn the light switch to position

Pull the light switch to the appropriate position.

,

or

.

›

The rear fog light does not illuminate when an ac-

cessory is connected to the trailer socket.

The rear fog lamp automatically shuts oﬀ when

the boot lid is opened.

Settings

The indicator light remains lit.

Activating/deactivating the automatic headlights

system in rain

The function is activated or deactivated in the fol-

lowing menu in the Infotainment system:

Hazard warning light system

Press the button to switch on or oﬀ in the mid-

dle part of the control panel.

›

The hazard warning lights can be switched on auto-

matically during hard braking. The hazard warning

lights are then switched oﬀ again automatically

when starting oﬀ or accelerating.

Or:

Activating/deactivating convenience signalling

The function is activated or deactivated in the fol-

lowing menu in the Infotainment system:

When the hazard warning system is on and the

turn signal is switched on, the hazard warning lights

will be switched oﬀ temporarily and only the turn

signal will ﬂash on the relevant side of the vehicle.

Or:

One-sided parking light

The one-sided parking light allows one side of the

parked vehicle to be illuminated through activation

of the corresponding sidelights.

Headlamp levelling, LED headlights

In Infotainment, select the following menu:

›

Switch on the side-

lights on the right

Switch on the side-

lights on the left

A

Or:

B

Adjust the headlight range using the slider. The

headlight range must correspond to the vehicle's

load.

›

Switch oﬀ the ignition.

Move the lever to the

appropriate position.

›

Front seats occupied, boot empty

All seats occupied, boot empty

All seats occupied, boot loaded

Driver's seat occupied, boot loaded

Lock the vehicle.

›

When the parking light is

switched on, an acoustic

warning signal sounds and the driver's door is

opened. After a few seconds or after the driver's

door is closed, the warning signal will stop.

In the event of another vehicle loading condition, the

positions ,

,

can be used.

For the Full LED headlights, the headlight range

control is adjusted automatically.

50 Lighting, windscreen wipers and washers › COMING HOME, LEAVING HOME exterior lighting

The headlights are misted up on the inside

Inside the headlights, moisture may occur. This is not

a defect.

WARNING

Risk of an accident!

An incorrectly adjusted headlight range can cause in-

suﬃcient vehicle lighting or can dazzle other road

users.

Malfunction of the automatic headlight circuit

Clean the windscreen in the area of the rain/light

sensor.

›

Adjust the headlight range correctly.

▶

Adjust headlights for driving in right / left-hand

traﬃc

Applies to full LED headlights.

Beam of light in front of the vehicle has shortened

Headlight defective.

Seek the help of a specialist garage.

›

In Infotainment, select the following menu:

›

Driving lights defective

If a message regarding the failed driving lights is dis-

played, the light will work in emergency mode.

Or:

Drive on, exercising appropriate caution.

Seek the help of a specialist garage.

›

Activate the travel mode function.

›

Adapt headlights for the opposite direction of traf-

ﬁc - driving abroad

Applies to LED headlights.

COMING HOME, LEAVING HOME

exterior lighting

Seek the help of a specialist garage.

›

Functionality

Activate / deactivate the dynamic cornering lights

function

Applies to full LED headlights.

The COMING HOME function turns on the light after

turning oﬀ the ignition and opening the driver's door.

The light switches oﬀ automatically after the set

lighting time has elapsed.

In Infotainment, select the following menu:

›

The LEAVING HOME function switches on the light

when unlocking the vehicle with the wireless remote

control.

Or:

Activate or deactivate the function Dynamic cornering

light

›

.

Operating conditions

✓ Visibility has worsened.

Troubleshooting

✓

The light switch is in the

position.

Turn signal light defective

ﬂashes faster - turn signal light on the right de-

fective

Settings

Check the turn signal light on the right.

›

This function is set in the following menu in the Info-

tainment system:

ﬂashes faster - turn signal light on the left de-

fective

Check the turn signal light on the left.

›

Or:

does not ﬂash when the trailer is hitched -

trailer turn signal light defective

Check the trailer lighting.

›

Light Assist high-beam assist system

Functionality

Light bulb or LED bulb is defective

or

Information appears in the display regarding

the defective lights.

illuminates

The high beam assist system automatically switches

the high beam on and oﬀ.

Replace the defective bulb.

In case of a defective LED bulb, contact a specialist

garage for help.

›

WARNING

Risk of accident!

If necessary, manually switch the high beam on or

▶

oﬀ.

Lighting, windscreen wipers and washers › Dynamic Light Assist headlight assist system 51

Operating conditions

✓ The system is activated.

Operating conditions

✓ The system is activated.

✓

The light switch is in the

position.

The light switch is in the

position.

✓ The driving speed is higher than 30 km/h.

✓ The low beam is switched on.

✓ The driving speed is higher than 30 km/h (for

some countries, higher than 60 km/h).

✓ The low beam is switched on.

Operation

Switching on

Push the lever in the

direction of the arrow.

›

Push the lever in the

direction of the arrow.

›

It lights up in the instru-

ment cluster

from

the isolation box.

ment cluster

the isolation box.

from

Switching oﬀ

Manually switch the high beam on or oﬀ.

Switching oﬀ

Manually switch the high beam on or oﬀ.

›

Function restriction

The system may dazzle other road users if their

headlights/lights are not detected for the following

reasons, for example:

The system may dazzle other road users if their

headlights/lights are not detected for the following

reasons, for example:

The headlights/lights of oncoming vehicles are

covered by crash barriers, for example.

▶

The headlights/lights of oncoming vehicles are

covered by crash barriers, for example.

▶

The headlamps/lights of the oncoming or preced-

ing vehicle are dirty or not functioning.

▶

The headlamps/lights of the oncoming or preced-

ing vehicle are dirty or not functioning. The system

can also recognize a vehicle as a single-lane means

of transport.

▶

Settings

Activation/deactivation

The function is activated or deactivated in the fol-

lowing menu in the Infotainment system:

Settings

Activation/deactivation

The Dynamic Light Assist is activated or deactivated

in the following menu in the Infotainment system:

Or:

Dynamic Light Assist headlight assist

system

Functionality

Replace light bulbs

The headlight assist system automatically switches

the high beam on and oﬀ.

What you should be mindful of

DIY replacement of the following bulbs is possible.

Have the remaining light sources replaced by a spe-

cialist garage.

When the high beam is switched on, it adjusts the

light cone so that the drivers of oncoming and pre-

ceding vehicles are not dazzled.

The new bulb must conform to the speciﬁcation of

the original light bulb. The name of the bulb is

marked on the bulb socket.

WARNING

Risk of accident!

If necessary, manually switch the high beam on or

▶

oﬀ.

52 Lighting, windscreen wipers and washers › Replace light bulbs

NOTICE

Rear turn signal and reversing lights

Loosen and remove the light

Danger of headlight damage due to the ingress of

water and dirt!

Always ﬁt the protective cap on the headlight cor-

rectly after changing a bulb.

▶

Remove the cover with

the bracket from the

tool kit.

›

Conditions for changing a bulb

✓ Ignition oﬀ

✓ Light switched oﬀ

Front turn signal

Unscrew the screws

A and remove the

light.

Remove the protective

cap from the headlight.

›

Press the lock mecha-

nisms on the connec-

tor and remove the

connector.

Remove the base with

the bulb.

Replacing the light bulb

Change the bulb in the

socket.

Turn the corresponding

socket with the bulb

and remove it.

›

Insert the socket with

the light bulb into the

light so that the ﬁxing

lugs A ﬁt into the re-

cesses on the head-

light.

›

Turn the defective bulb

in the socket and re-

move it.

Insert a new light bulb

into the socket and se-

cure the light bulb by

turning it in the direc-

›

Fit the protective cap

on the headlight again.

tion of

.

Insert the socket with

the new bulb into the

light so that the guide

›

Lighting, windscreen wipers and washers › Interior lighting 53

lugs on the socket are aligned with the corre-

sponding openings in the light.

About 30 seconds after all the doors have been

closed

▶

Turn the socket clockwise to secure.

›

If a door remains open and the ignition is switch-

ed oﬀ, the lights will turn oﬀ automatically after 10

minutes.

Insert and ﬁx the light

Insert the connector into the light until it clicks into

›

place.

Automatic switching on/oﬀ of the footwell light-

ing

The lighting only works when the dipped or parking

lights are on.

The lighting is also switched on automatically after

opening the door (e.g. when getting in or out).

Turn on the lighting for the make-up mirror in the

sun visors on the windscreen

Slide oﬀ the cover of the make-up mirror.

›

› ^{Insert the lamp with the holes}A onto the pins B

Settings

in the body.

The brightness level of the footwell lighting is set in

the Infotainment in the following menu when the

low beam or parking light is switched on:

NOTICE

Risk of damage to the electrical system due to water

ingress!

Make sure that the seal is used correctly when in-

▶

stalling the lamp C .

Or:

NOTICE

Risk of damage to the electrical system!

Make sure that the lines between the lamp and the

body are not pinched when the lamp is inserted.

▶

Interior ambient light

Usage

Screw the light into place.

Fit the cover of the light, ensuring it clicks into

place.

›

The ambient lighting ensures a comfortable atmos-

phere in the vehicle interior.

The lighting only works when the dipped or parking

lights are on.

Interior lighting

Operation

The lighting is also switched on automatically after

opening the door.

Operation of the lighting

Lighting in front and rear

Rear lighting

Reading lamp left

Settings

The background lighting brightness settings are set

in the Infotainment system, in the following menu:

Reading lamp right

Automatically switch on and switch oﬀ

When the front light is set to , the rear light

is automatically switched on or oﬀ.

Or:

Switching on automatically

The lighting switches on when one of the following

events occurs.

The vehicle is unlocked

One of the doors is opened

Windscreen wipers and washers

Operating conditions

▶

Automatic switch oﬀ

The lighting switches oﬀ when one of the following

events occurs:

✓ Engine compartment ﬂap closed

✓ Boot lid closed

✓ Ignition on

The vehicle is locked

The ignition is switched on

▶

54 Lighting, windscreen wipers and washers › Windscreen wipers and washers

Operation

Switching oﬀ

WARNING

Risk of an accident!

At low temperatures, windscreen washer ﬂuid can

freeze on the windscreen and restrict visibility.

Only use the windscreen washer when the wind-

screen is warm.

Automatic rear window wiping

If the windscreen wiping is performed without inter-

ruption, then the automatic regular intermittent wip-

ing of the rear window takes place.

▶

When the windscreen wipers are switched on, the

rear window is automatically wiped when the re-

verse gear is engaged.

Wipe and wash the windscreen

Settings

Activating/deactivating automatic wiping

The functions for automatic rear window wiping and

automatic wiping in the rain can be activated and de-

activated in the following menu in the Infotainment

system:

Or:

Fast wiping

Slow wiping

Depending upon vehicle equipment:

Reﬁlling windscreen washer ﬂuid

Intermittent wiping

▶

Automatic wiping controlled by the rain sensor

▶

WARNING

Risk of an accident!

Switching oﬀ

Use windscreen washer ﬂuid that is suitable for the

weather conditions.

▶

Tip-wiping (spring-loaded position)

A

Setting the wiping speed for the position

Washing and wiping (spring-loaded position)

NOTICE

Risk of damage to the windscreen washer system!

When reﬁlling the washer ﬂuid, do not remove the

strainer from the neck of the container.

▶

Depending on the vehicle equipment, the wind-

screen washer nozzles of the windscreen can be

heated automatically.

NOTICE

Risk of damage to the headlights!

Only use washer ﬂuid that does not attack polycar-

bonates.

Clean headlights

▶

When the headlights are switched on, they are

cleaned the ﬁrst time and after every tenth wash of

the windscreen. Setting the spray interval can be

carried out by a specialist garage.

NOTICE

Risk of damage to engine compartment compo-

nents!

Close the container after reﬁlling the windscreen

washer ﬂuid.

Wipe and wash the rear window

▶

The windscreen washer tank is located in the engine

compartment » page 12.

The container can hold a volume of 3.1 litres and 4.7

litres for vehicles with a headlight cleaning system.

When the container is in the left-hand area of the

engine compartment, the volume of the container is

3.65 litres.

Open the engine compartment lid » page 194.

Gently open the top of the sealing cap.

Top up the windscreen washer ﬂuid.

Close the sealing cap of the tank.

›

Spring-loaded position:

›

Washing and wiping the windscreen

▶

›

Cleaning the rear view camera

▶

Wiping

Lighting, windscreen wipers and washers › Windscreen wipers and washers 55

Press the catch and re-

move the wiper blade.

Troubleshooting

›

Windscreen washer ﬂuid level too low

Insert the new wiper

blade until it clicks into

place.

Fold the windscreen

wiper arm back onto

the windscreen.

Turn on the ignition

and push the control

lever down.

›

illuminates together with

or

illuminates together with

Top up the windscreen washer ﬂuid.

›

Frozen windscreen wipers

Carefully remove frozen windscreen wipers from

the windscreen before switching on the ignition

and free them from snow and ice.

›

Folding down windscreen wiper arms and

replacing windscreen wiper blades

For folding down the windscreen wiper from the

screen you must ﬁrst adjust the wiper arms to the

folded position.

NOTICE

Risk of damage to the windscreen wipers and the

engine compartment lid!

Close the bonnet before lowering the wiper arms

from the window.

▶

Do not turn on the ignition when the windscreen

wiper arms are folded away.

▶

Set the windscreen wiper arms into the folding po-

sition

Switch the ignition on and oﬀ again.

›

Within 10 seconds,

›

press the control lever

down and hold for

about 2 seconds.

Replace the windscreen wiper blade

CAUTION

Risk of accident!

Change the windscreen wiper blades once or twice

a year.

▶

Fold the windscreen wiper arm away from the

windscreen.

›

Lighting, windscreen wipers and washers for Your Skoda Superb SUV Fourth Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals