2024-2026 Skoda Superb SUV Lighting, windscreen wipers and washers -> Replace light bulbs User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lighting, windscreen wipers and washers -> Replace light bulbs for Your Skoda Superb SUV Fourth Generation (2024-2026)

Lighting, windscreen wipers and washers › Dynamic Light Assist headlight assist system 51  
Operating conditions  
✓ The system is activated.  
Operating conditions  
✓ The system is activated.  
✓
✓
The light switch is in the  
position.  
The light switch is in the  
position.  
✓ The driving speed is higher than 30 km/h.  
✓ The low beam is switched on.  
✓ The driving speed is higher than 30 km/h (for  
some countries, higher than 60 km/h).  
✓ The low beam is switched on.  
Operation  
Operation  
Switching on  
Switching on  
Push the lever in the  
direction of the arrow.  
›
Push the lever in the  
direction of the arrow.  
›
It lights up in the instru-  
It lights up in the instru-  
ment cluster  
from  
the isolation box.  
ment cluster  
the isolation box.  
from  
Switching off  
Manually switch the high beam on or off.  
Switching off  
Manually switch the high beam on or off.  
›
›
Function restriction  
Function restriction  
The system may dazzle other road users if their  
headlights/lights are not detected for the following  
reasons, for example:  
The system may dazzle other road users if their  
headlights/lights are not detected for the following  
reasons, for example:  
The headlights/lights of oncoming vehicles are  
covered by crash barriers, for example.  
▶
The headlights/lights of oncoming vehicles are  
covered by crash barriers, for example.  
▶
The headlamps/lights of the oncoming or preced-  
ing vehicle are dirty or not functioning.  
▶
The headlamps/lights of the oncoming or preced-  
ing vehicle are dirty or not functioning. The system  
can also recognize a vehicle as a single-lane means  
of transport.  
▶
Settings  
Activation/deactivation  
The function is activated or deactivated in the fol-  
lowing menu in the Infotainment system:  
Settings  
Activation/deactivation  
The Dynamic Light Assist is activated or deactivated  
in the following menu in the Infotainment system:  
Or:  
Or:  
Dynamic Light Assist headlight assist  
system  
Functionality  
Replace light bulbs  
The headlight assist system automatically switches  
the high beam on and off.  
What you should be mindful of  
DIY replacement of the following bulbs is possible.  
Have the remaining light sources replaced by a spe-  
cialist garage.  
When the high beam is switched on, it adjusts the  
light cone so that the drivers of oncoming and pre-  
ceding vehicles are not dazzled.  
The new bulb must conform to the specification of  
the original light bulb. The name of the bulb is  
marked on the bulb socket.  
WARNING  
Risk of accident!  
If necessary, manually switch the high beam on or  
▶
off.  
52 Lighting, windscreen wipers and washers › Replace light bulbs  
NOTICE  
Rear turn signal and reversing lights  
Loosen and remove the light  
Danger of headlight damage due to the ingress of  
water and dirt!  
Always fit the protective cap on the headlight cor-  
rectly after changing a bulb.  
▶
Remove the cover with  
the bracket from the  
tool kit.  
›
›
›
Conditions for changing a bulb  
✓ Ignition off  
✓ Light switched off  
Front turn signal  
Unscrew the screws  
A and remove the  
light.  
Remove the protective  
cap from the headlight.  
›
›
›
Press the lock mecha-  
nisms on the connec-  
tor and remove the  
connector.  
Remove the base with  
the bulb.  
Replacing the light bulb  
Change the bulb in the  
socket.  
Turn the corresponding  
socket with the bulb  
and remove it.  
›
Insert the socket with  
the light bulb into the  
light so that the fixing  
lugs A fit into the re-  
cesses on the head-  
light.  
›
›
Turn the defective bulb  
in the socket and re-  
move it.  
Insert a new light bulb  
into the socket and se-  
cure the light bulb by  
turning it in the direc-  
›
›
Fit the protective cap  
on the headlight again.  
tion of  
.
Insert the socket with  
the new bulb into the  
light so that the guide  
›
Lighting, windscreen wipers and washers › Interior lighting 53  
lugs on the socket are aligned with the corre-  
sponding openings in the light.  
About 30 seconds after all the doors have been  
closed  
▶
Turn the socket clockwise to secure.  
›
If a door remains open and the ignition is switch-  
ed off, the lights will turn off automatically after 10  
minutes.  
Insert and fix the light  
Insert the connector into the light until it clicks into  
›
place.  
Automatic switching on/off of the footwell light-  
ing  
The lighting only works when the dipped or parking  
lights are on.  
The lighting is also switched on automatically after  
opening the door (e.g. when getting in or out).  
Turn on the lighting for the make-up mirror in the  
sun visors on the windscreen  
Slide off the cover of the make-up mirror.  
›
› Insert the lamp with the holes A onto the pins B  
Settings  
in the body.  
The brightness level of the footwell lighting is set in  
the Infotainment in the following menu when the  
low beam or parking light is switched on:  
NOTICE  
Risk of damage to the electrical system due to water  
ingress!  
Make sure that the seal is used correctly when in-  
▶
stalling the lamp C .  
Or:  
NOTICE  
Risk of damage to the electrical system!  
Make sure that the lines between the lamp and the  
body are not pinched when the lamp is inserted.  
▶
Interior ambient light  
Usage  
Screw the light into place.  
Fit the cover of the light, ensuring it clicks into  
place.  
›
›
The ambient lighting ensures a comfortable atmos-  
phere in the vehicle interior.  
The lighting only works when the dipped or parking  
lights are on.  
Interior lighting  
Operation  
The lighting is also switched on automatically after  
opening the door.  
Operation of the lighting  
Lighting in front and rear  
Rear lighting  
Reading lamp left  
Settings  
The background lighting brightness settings are set  
in the Infotainment system, in the following menu:  
Reading lamp right  
Automatically switch on and switch off  
When the front light is set to , the rear light  
is automatically switched on or off.  
Or:  
Switching on automatically  
The lighting switches on when one of the following  
events occurs.  
The vehicle is unlocked  
One of the doors is opened  
Windscreen wipers and washers  
Operating conditions  
▶
▶
Automatic switch off  
The lighting switches off when one of the following  
events occurs:  
✓ Engine compartment flap closed  
✓ Boot lid closed  
✓ Ignition on  
The vehicle is locked  
The ignition is switched on  
▶
▶

Related Topics

Lighting, windscreen wipers and washers
Exterior lighting COMING HOME, LEAVING HOME lighting Light Assist high-beam assist system Dynamic Light Assist headlight assist Interior lighting Interior ambient light Windscreen wipers and washers

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot