2-15
Keys and doors/Child safety locks
& Shock sensors (dealer op-
Examples:
Child safety locks
tion)
– Vibration from a construction site
– Vibration in a multistory car park
The shock sensors trigger the alarm
– Vibration from trains
system when they sense impacts applied
. You can have the sensitivity of the
to the vehicle and when any of their
shock sensors adjusted to your pre-
electric wires are cut. The alarm system
ference by your SUBARU dealer.
causes the horn to sound and the hazard
warning flashers to flash for a short time
when the sensed impact is weak, but it
warns of a strong impact or multiple
impacts by sounding the horn and flashing
the hazard warning flashers, both lasting
approximately 30 seconds.
If you desire, your SUBARU dealer can
connect them and set them for activation
Each rear door has a child safety lock.
or deactivation.
When the child safety lock lever is in the
NOTE
lock position, the door cannot be opened
. The shock sensors are not always
from inside. The door can only be opened
able to sense impacts caused by break-
from the outside.
ing in, and cannot sense an impact that
WARNING
does not cause vibration (such as
breaking the glass using a rescue
Always turn the child safety locks to
hammer).
the “LOCK” position when children
. The shock sensors may sense vi-
sit in the rear seat. Serious injury
bration as indicated in the following
could result if a child accidentally
examples and trigger the alarm system.
opens the door and falls out.
Select the settings of the alarm system
and shock sensors appropriately de-
pending on where you usually park
your vehicle.
English 
