2-17
Keys and doors/Windows
NOTE
This switch also has a one-touch auto up
! Operating the passengers’ win-
feature that allows the window to be
. If a window detects an impact simi-
dows
closed fully without holding the switch.
lar to that caused by trapping an object
Pull the switch up until it clicks and release
(for example, when the vehicle encoun-
it, and the window will fully close. To stop
ters a deep pothole), the anti-entrap-
the window halfway, push the switch down
ment function may operate.
lightly.
. The window cannot be operated for
a few seconds after the anti-entrap-
NOTE
ment function operates.
If the vehicle’s battery is disconnected
. If the vehicle’s battery is discon-
due to situations such as battery or
nected due to situations such as
fuse replacement, the one-touch auto
battery or fuse replacement, the anti-
up/down function is deactivated. Initi-
entrapment function is deactivated.
alize the power window to reactivate
Initialize the power window to reacti-
the one-touch auto up/down function.
vate the anti-entrapment function. Re-
Refer to “Initialization of power win-
fer to “Initialization of power window”
To open:
dow” F2-19.
F2-19.
Push the appropriate switch down and
While closing the driver’s window auto-
hold it until the window reaches the
! Anti-entrapment function
matically, if the window senses a sub-
desired position.
stantial enough object trapped between
To close:
CAUTION
the window and the window frame, it
Pull the switch up and hold it until the
automatically moves down slightly and
. Never attempt to test this func-
window reaches the desired position.
stops.
tion using fingers, hands or other
parts of your body.
. The anti-entrapment function
may not operate properly if some
object gets trapped just before
the window fully closes.
– CONTINUED –
English 
