11-13
Maintenance and service/Air cleaner element
& Replacing the air cleaner
Air cleaner element
3. Loosen the screw on the clamp and
pull the air intake boot out of the air
element
cleaner case.
Replace the air cleaner element according
WARNING
4. Unsnap the two clips holding the air
to the maintenance schedule in the
cleaner case (rear).
“Warranty and Maintenance Booklet”. Un-
Do not operate the engine with the
der extremely dusty conditions, replace it
air cleaner element removed. The air
more frequently. It is recommended that
cleaner element not only filters
you always use genuine SUBARU parts.
intake air but also stops flames if
the engine backfires. If the air
cleaner element is not installed
when the engine backfires, you
could be burned.
CAUTION
When replacing the air cleaner ele-
ment, use a genuine SUBARU air
5. Open the air cleaner case and remove
cleaner element. If it is not used,
the air cleaner element.
there is the possibility of causing a
6. Clean the inside of the air cleaner case
negative effect to the engine.
1)
Connector
(both front and rear) with a damp cloth and
2)
Clip
install a new air cleaner element.
The air cleaner element functions as a
3)
Clamp
filter screen. When the element is perfo-
4)
Air intake boot
rated or removed, engine wear will be
5)
Clip
excessive and engine life shortened.
1. Unplug the connector that is attached
It is not necessary to clean or wash the air
to the top of the air cleaner case.
cleaner element.
2. Detach the connector cable from the
clip on the right side of the air cleaner
case.
– CONTINUED –