2010-2016 Subaru XV SUV Maintenance and service -> Engine hood User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance and service -> Engine hood for Your Subaru XV SUV First Generation (2010-2016)

11-5Maintenance and service/Engine hoodEngine hoodTo open the hood:burn or other injury. Note that theoil filter becomes very hot when1. If the wiper blades are lifted off thethe engine is running and re-windshield, return them to their originalCAUTIONmains hot for some time engine has stopped.. When you open the engine hood,do not stand the wiper blades , while the hood is& When checking or servicingopen, do not operate the wind-in the engine compartmentshield wipers. Doing so couldwhile the engine is runningresult in damage to the enginehood and wiper . Be extremely careful not to catchfingers or other objects whenA running engine can be the engine your fingers, hands, clothing,hair and tools away from the cooling. Do not push the hood forcibly tofan, drive belt and any other movingclose it. It could deform theengine parts. Removing rings,metal.2. Pull the hood release knob under thewatches and ties is panel.. Be extremely careful opening theengine hood when the wind isstrong. The engine hood couldclose suddenly, possibly causinginjuries from slamming.. Do not install accessories otherthan genuine SUBARU parts tothe engine hood. If the enginehood becomes too heavy, thestay may not be able to supportholding it open.– CONTINUED –
11-5
Maintenance and service/Engine hood
Engine hood
To open the hood:
burn or other injury. Note that the
oil filter becomes very hot when
1. If the wiper blades are lifted off the
the engine is running and re-
windshield, return them to their original
CAUTION
mains hot for some time after
position.
the engine has stopped.
. When you open the engine hood,
do not stand the wiper blades up.
Furthermore, while the hood is
& When checking or servicing
open, do not operate the wind-
in the engine compartment
shield wipers. Doing so could
while the engine is running
result in damage to the engine
hood and wiper blades.
WARNING
. Be extremely careful not to catch
fingers or other objects when
A running engine can be dangerous.
closing the engine hood.
Keep your fingers, hands, clothing,
hair and tools away from the cooling
. Do not push the hood forcibly to
fan, drive belt and any other moving
close it. It could deform the
engine parts. Removing rings,
metal.
2. Pull the hood release knob under the
watches and ties is advisable.
instrument panel.
. Be extremely careful opening the
engine hood when the wind is
strong. The engine hood could
close suddenly, possibly causing
injuries from slamming.
. Do not install accessories other
than genuine SUBARU parts to
the engine hood. If the engine
hood becomes too heavy, the
stay may not be able to support
holding it open.
– CONTINUED –
11-6 Maintenance and service/Engine hood3. Release the secondary hood releaseWARNINGby moving the lever between the frontgrille and the hood toward the check that the hood isproperly locked before you startdriving. If it is not, it might fly openwhile the vehicle is moving andblock your view, which may causean accident and serious bodily in-jury.4. Lift up the hood, release the hood propfrom its retainer and put the end of thehood prop into the slot in the close the hood:1. Lift the hood slightly and remove thehood prop from the slot in the hood andreturn the prop to its retainer.2. Lower the hood to a height of approxi-mately 5.9 in (15 cm) above its closedposition and then let it drop.3. After closing the hood, be sure thehood is securely this does not close the hood, release itfrom a slightly higher position.
11-6 Maintenance and service/Engine hood
3. Release the secondary hood release
WARNING
by moving the lever between the front
grille and the hood toward the left.
Always check that the hood is
properly locked before you start
driving. If it is not, it might fly open
while the vehicle is moving and
block your view, which may cause
an accident and serious bodily in-
jury.
4. Lift up the hood, release the hood prop
from its retainer and put the end of the
hood prop into the slot in the hood.
To close the hood:
1. Lift the hood slightly and remove the
hood prop from the slot in the hood and
return the prop to its retainer.
2. Lower the hood to a height of approxi-
mately 5.9 in (15 cm) above its closed
position and then let it drop.
3. After closing the hood, be sure the
hood is securely locked.
If this does not close the hood, release it
from a slightly higher position.

Related Topics

Popular Owner Manuals